I have a RCA Home Theater System RT2380BK I have the speakers wired but i want to hook it up to my dish network when I'm watching movies.Can u help me?

How to Setup a RCA DVD Home Theatre System RTD325W ...

? 10:31
https://www.youtube.com/watch?v=20dRIj8KWPU
Jan 28, 2012 - Uploaded by TheHandofOdd
Just how to setup and get the optical cable working for those who need help.

RCA Home Theater System Set Up - YouTube

? 5:37
https://www.youtube.com/watch?v=j0UhnbrjJto
Sep 14, 2012 - Uploaded by gangstafly5000
The RCA hooked up to 43' plasma Samsung. ... RCA Home Theater System Set Up. gangstafly5000 ...

RCA 5.1 Surround Sound 1000 Watt HOME THEATER ...

? 13:06
https://www.youtube.com/watch?v=1xfEmkwCwyA
Oct 18, 2014 - Uploaded by bigtruckseriesreview .
I bought recently rca system home theater and makes strong fan.... +Aiden woodruff Change he settings to surround, and make sure all of the ...

How to Set Up an RCA Home

for movie only it get the 5.1 effect

Hi,

Yes it is possible.

All you need to do is run a cable from the Audio Out on your TV to the Audio In of the DVD.

Then you will be able to get the sound of TV channels from the DVD speakers.

We would be happy to help with that. Here is a list of someof the codes that we have for RCA home theater systems: 703, 852, 772, 638, 704, and 727.

Press and hold the AUX mode button until all mode buttons at the top of theremote come on, then release. Enter the number 2 then one of the codesfor your RCA home theater system provided above. Press the pound (#) button, the modelight should flash three times. Checkthat the code works by trying several different functions on the remote to makesure it will properly operate your RCA home theater system. Keep in mind that some codesmay not be compatible with your equipment. If this is the case, please try theother codes listed for that device until you find one that is compatible withyour equipment.

We hope this helps you, and thank you for being a valued DISH Network Customer!


Phillip Chang
DISH Network Customer Service Representative

Hello,at this point you have two options, You'll either need the home re-wired so the receiver is in the same room, or you can try purchasing an RF modulator. This is basically a cable converter you can find these at radio shack. Hope this helps!!!


Daniel Busa
DISH Network Customer Service

Try whatever applies best below, in order...

Cable Box optical Digital Audio to Digital Audio In. (This brings TV-related multi-channel and normal audio into the receiver so you can hear it over the speakers. Turn TV volume OFF.

The cable box probably has a pair of stereo Audio Out RCA jacks. Run those directly to the TV so you can watch and hear cable programming over the TV's speakers without having to turn the system on. Turn TV volume UP.

Depending on your TV's Video In capabilities, use the Cable Box HDMI, Component (Red, Blue and Green), or Composite Video (single Yellow associated with the Audio Out) directly attached to the TV.

You will need to run a set of audio cables from the TV1 output on the rear of the 625 directly to one of the three audio inputs on the surround system. Thanks for using Fix Ya.

Just use rca cables

HI, connect audio output from tv to system,you may have to turn this on or turn up in tv menu for some sharp tvs,this should get sound for tv and dvd and anything else you hook up to tv.

Hope this helps.
CABLE GUY.

I'd connect the dish network receiver to the TV's "in" ports and then use an RCA cable to connect the TV's out ports to the onkyo home theater's in ports. It should look something like this:

DVR out -> in Sanyo 42", Sanyo 42" out -> Home theater in

Make sure you don't accidentally plug the cable into the out instead of the in as then you won't be able to hear (and possibly see) anything.