I have cannon ip2772 printer which has an error code 6000. Please help me solve the problem. thanks

Clive

• 4362 Answers

SOURCE: printer error code 6000

Hi there it is ink error.
You can try to reset the cartages this may do it Please call back let us know if it worked for you, PLEASE.

1. Start with printer off
2. Press and hold resume Button (triangle in the circle) and click “Power” button. Green led should be on
3. While holding the Power button, release the Resume Button.
4. Without releasing the Power Button, click “Resume” button for two times and release Both Buttons.
5. Click “Resume” for four times then soon click “Power” button, to confirm the selected action (reset counter absorber).
6. Turn off the printer and turn on again

Posted on Apr 26, 2010

SOURCE: error code 6000

Error 6000 is a service call error, meaning that the printer needs to be taken into a canon authorized service facility for repair.

This is a line feed error, with the problem originating from the timing disk film or the printer's logic board.

Posted on May 28, 2009

SOURCE: Error code E000020-0000 in cannon ir5000/6000

Main cause: The machine is not receiving toner properly because 1)The hopper connector is left disconnected. 2) The hopper motor (M9/M10) is faulty.3) The toner sensor (TS1/TS2) is faulty. 4) The DC controller PCB is faulty.
If you recently added toner, recheck that area.
Basically the copier is trying to add toner and is not getting it.

Posted on Oct 25, 2009

SOURCE: canon mx310 error code 6000

Error 6000 is a service call error, meaning that the printer needs to be taken into a canon authorized service facility for repair.

This is a line feed error, with the problem originating from the timing **** disk film or the printer's logic board.

Posted on May 28, 2009

Clive

• 4362 Answers

SOURCE: code error 6000 in canon pixma mp 500

Hi there it is ink error.
You can try to reset the cartages this may do it Please call back let us know if it worked for you, PLEASE.

1. Start with printer off
2. Press and hold resume Button (triangle in the circle) and click “Power” button. Green led should be on
3. While holding the Power button, release the Resume Button.
4. Without releasing the Power Button, click “Resume” button for two times and release Both Buttons.
5. Click “Resume” for four times then soon click “Power” button, to confirm the selected action (reset counter absorber).
6. Turn off the printer and turn on again

Posted on Apr 26, 2010