I do not have a problem i need a manual or instructions on useing this heater for lasko ceramic element model #751320

Try:
http://bit.ly/Lasko_Ceramic_Tower_Heater_MANUAL

Follow this link:

http://www.laskoproducts.com/heaters/heaters.html

and put in your model of heater. Once on your models page, the link to the manual is near the bottom of the page, a red link.

Here's a link to a Lasko page where you can download an Owners Manual. Unfortunately, the link from that page no longer works, However, there is a 800 number for customer service. They can provide you with the Owners Manual. Hope this helped you.

You have an excess amount of lint buildup inside the ceramic element, you need to take the unit apart to clean the element. The fan housing covers the backside of the element and blows the air forward, over a period of time lint builds up.

You need a qualified person to take it apart safely and clean it. It takes a Special Chinese Triangle Bit screwdriver to remove the 2 tamper proof screws from the back. Purchased mine at mcmastercarr.com

Triangle Bits

These power bits have a 1/4" hex shank and are 2" long.
Size(A) EachTA180.070"5941A11$3.77TA200.083"5941A123.77TA230.090"5941A133.78TA270.100"5941A143.77

According to the Consumer Products Safety Commission http://www.cpsc.gov/cpscpub/prerel/prhtml07/07227.html there was a recall of your model heater in 2007. Does this effect yours? Depends on whether or not yours was manufactured prior to this date. Even if it was, recalls and reimbursement for what you may have paid for the heater has time limits for you to make a claim.
Click on the above link for more information.

The answer is yes you can get one for free. You can download the manual here:
http://www.laskoproducts.com/instructions/751320%20Ins%20751320ESnew.pdf

If we can be of further assistance just ask. Thanks for choosing FixYa,
Kelly

Unplug it for 5-10 minutes. Then try again, worked for me. Plus it says to do so in the back of unit! Hope this helped

hai sir the button which you are confused in is used only for reseting the equipment.please find your equipment seller for a copy of users manual.

It depends on where the smoke is coming from. If it's from the heating elements, it's normal as dust and residue burn off. If it is coming from the control section, it's bad and the heater should not be used.