How do i get my jvc kd-r210 out of demo mode?

Turn on the system with the Power button. Press and hold SEL (the button with the dash) to the left of the M (memory) button until you see the current Demo Mode state. Use the up/down arrows (these are the search forward/back buttons) to select Clock H. Turn the knob to set the current hour. Use the arrow keys to select Clock M. Turn the knob to set the current minutes. Press SEL again to save the setting.

This is on page 1 in the left hand column of the KD-R210 manual. JVC has the manual on their manuals page. Start at http://books.jvc.com/ and search for the model number. The direct link is currently http://books.jvc.com/Download/417742468/GET0621-001A.pdf . Crutchfield also has the manual on the product site: https://www.crutchfield.com/S-4DfLkhwuvvp/p_105KDR210/JVC-KD-R210.html . Scroll down to the What's in the box section.

I hope this helps.

Cindy Wells

https://www.manualslib.com/manual/81226/Jvc-Kd-R210.html JVC KD R210 Instructions Installation

hope this helps

https://www.manualslib.com/manual/81226/Jvc-Kd-R210.html

JVC KD R210 Instructions Installation

Hello Samir,
Visit books.jvc.com and look for user manual. I would recommend you download the user manual or the instruction manual

Sub
You need to look through the JVC KD-R210 manual.
A JVC Dealer / Installer may have seen a similar problem & suggest remedy.

click below for the instructions:

jvc kd r210

Hope this helps.

Zeppelinx12

Hello... sorry to hear you are having problems! With the radio powered up, if you will hold down the "sel" button for about 2-3 seconds, it will enter into the menu mode. From there you will see "demo". Turn the volume knob counter clockwise to turn it off. Then press advance track button ">>>" til it says "clock h" and then rotate the volume knob to adjust the hour. Press the ">>>" button once more to the "clock m". Rotate the volume knob to set the minutes. After that you can press the "sel" button again to exit the menu mode. Hope this helped!! Good luck with your venture!

20 year car audio/video installer
Bay manager

hold your sel button until it takes you into your menu and use your track skip buttons till you get to DEMO and turn your volume knob to the left until it says off and then press select again to get out of your menu. :)

1) Push and hold (SEL)
2) Push (

I need a code JCV KD-G333???