Trying to find out what year and information on a hobort welder i thing model # ml604 serial# 3dw-9287 specs 1684 I think this is the right information Thank you

please check this brandboostr

Your '84234' looks like a serial number. There are manuals here.

Century Tool

Model 110-114 230 Amp AC 140 Amp DC Arc Welder Owners ...

www.centurytool.net > 110-114-manual

This Operators manual provides specific welder information for the Model 110-114 230 Amp AC 140 AMP DC Arc Welder. This manual contains information ... US$8.00 · ‎In stock
https://www.google.com/search?safe=off&rlz=1C1QJDB_enCA643CA644&sxsrf=ALeKk030_aoMP1EEx6RQMEs3tnAGapt7hg%3A1608153070115&ei=7nfaX5usBuSt5NoPgMqrgA8&q=century+230+amp+ac+welder+manual

..

If your machine is so old that you can't find the name of the manufacturer on it, then I highly doubt anyone out here will be able to help find a manual, even if one exists.

Try posting as much information about your machine as you can, to include a picture. Another option would be type your serial number into google and see what it comes up with.

The process to turn off the maintenance call-out light on a Miller Big Blue 350 PipePro welder will vary depending on the specific model and year of the machine.
Here are a few things you can try:

• Check the manual of the welder, it should have instructions on how to reset the maintenance call-out light.
• Some models have a button or switch on the control panel that needs to be pressed or flipped to reset the light.
• Some models may require you to enter a code or sequence of buttons to reset the light.
• If the light is still on after trying these steps, it may be necessary to take your welder to a qualified Miller Electric welder repair service center for diagnosis and repair.

It's important to check the manual of the welder for troubleshooting steps, also check the warranty of the welder and see if it's still covered by the manufacturer. It's best to take your welder to a qualified Miller Electric welder repair service center, they will be able to diagnose and fix the issue if needed.
Please note that some models may have different ways to reset the maintenance call-out light, it's important to refer to the manual or consult with the manufacturer for further information.

your best bet is to take it to a Gary Fisher or Trek dealer (Trek owns Gary Fisher, Bontrager and Klien) They should be able to quickly tell you what year it is.

The number and location of connection points on a Miller welder when removing the welder and motor from its casing will depend on the specific model and year of the machine you have.
Here are a few things you can try:

1. Check the manual of the welder, it should have a wiring diagram that shows the number and location of connection points on the welder.
2. If you don't have the manual, you can find wiring diagrams for most Miller welders on the Miller website, you can download it from there.
3. If you are not able to find the wiring diagram for your specific welder model, it may be necessary to contact Miller Electric and request a copy.
4. If you are not familiar with reading wiring diagrams or if you are not comfortable working with electrical equipment, it is best to take your welder to a qualified Miller Electric welder repair service center, they will be able to provide you with the necessary information and help you troubleshoot the issue.

Please note that some models may have different ways of wiring, it's important to refer to the manual or consult with the manufacturer for further information.

No problem:
http://www.millerwelds.com/om/o1301q_mil.pdf

if that one is not right, start here:
Miller - Owners Manuals
go to the "Find by Model name." and scroll down. Whoever does the coding for their website does not have all the bugs worked out on serial number cross references, and when dealing with that many, you must give them credit for thinking ahead about including a list of model names.

Try eReplacementParts.com : Power Tool Parts and Tool Repair.

for more info on this CPU please see
http://www.cpu-world.com/cgi-bin/ajax/parts.fcgi?PART2=Intel+Pentium+4+CPU+2.66GHz&CGI=OUTPUT%3DW%26PART%3DPART2%26ACTION%3DMATCHFP%26WANT%3DURL%26FIELD%3DPART2
You can use the information provided above on the intel website to obtain more/alternative information. The family/model/stepping notation is not used by intel, and is difficult to track down.
note that BX80547PG3400ET is a 3.4GHz processor.
10.December.2014

check your input power connections on the primary side of the welders transformer, then if its an infinite control welder check that control,otherwise if it's a plug- in selectable amperage check these connections,it sounds like the infinite control is getting dirty and not passing all the current it shows on the control, also double your O.C.V. on the secondary and see if its with-in welder specs