I have a flashing E:62:10 warning on the screen the camera still works

SOURCE: i have a flashing E:62:10

Hi Rajesh,

I have come across this problem earlier , and would seems as a weird thing to do but works, what you need to do , is remove the batteries and hit on the side of the camera with your palm and then try to put the batteries back in and then restart the camera , if that does not work , you need to get it done via the service center as this problem is associated with a gear of the lens and can be corrected by professional tools.

Hope that helps ...:)

SOURCE: Flash not working

this could be a number of problems first soloution gently hit the side of the camera where the battery is stored

if the dosent work try to pull and twist the lense gently

has the camera started to vibrate yet? and my other soloution would be

1. ress Menu button
2. togle across from REC Mode to setup
3. togle down thrice from camera to setup 1
4. togle across into sub menu
5. togle down from four times to Initialize
6. togle across again to the sub-menu
7. togle up from cancel to OK
8. press center button to accept the OK choice
9. Screen changes and so press okay again
10. It should restart the camera
11. Opening on the 'Clock Set' screen
12. togle down to cancel and use the camera and make sure that you have the camera to flash, if it works try again in the Auto function.
13. If it is still not working do not worry follow the steps again two or three more times, As this is generally a software error message and not a hardware malfunction.
14. If it is working then don't forget to set your Clock.

SOURCE: E:62:10 error

dear ,
this error is related to lens ...u r camera must had fallen some where or preesed some where badly