Is there a driver for windows 7 for the presonus VFire?

Not sure what your issue is, as long as you have the ASIO drivers installed you'll be able to get a decent copy of the main mix into and out of presonus. Even if not the standard windows sound drivers will recognise it as an external sound card and you can map this into / out of presonus so you don't actually need ANY drivers other than standard windows ones. If you were hoping to get access to the individual channels to do the mix in presonus forget it, this is not what what your mixer is designed for, get an X32 or other professional mixer.

Hi,
Welcome to Fixya. To be able to install the driver please download the latest driver on the link below.
Presonus Support Download
Thanks for using Fixya

What latency do you have the Presonus set to? Too low of latency can cause this issue.

Hi there,

you can download the software from the presonus website.

http://www.presonus.com/products/Detail.aspx?ProductId=7

I hope this helps.
Dave.

""When trying to open WaveLab 6 using Windows 7 I get an Unknown TException error message."Don't know if this helps. I'm using Win 10 with Presonus Firestudio as my audio interface. I kept getting the unknown TException when I tried to open Wavelab 6. Solved it by going to device manager and disabling the internal AMD sound card and two "High Definition Audio devices" with mfg shown as Microsoft. Must have been hardware conflict between Presonus and internal sound card.

Hi
Take it
http://www.presonus.com/media/downloads/PreSonus_iNSPiRE_1394_Installation.exe

Make sure you have your speakers connected to the main output. Also, in the "Universal Control" "Mixer" window, make sure that at least one of the mixes are assigner to "Mo", which stands for main output.

i have a new firebox presonus firewire..that we just instal evrythink seem al good..but my probleme ..on my playback my wave track aone the track popsup all...need help..thanks

Still having this problem? Mine was doing the same thing, so I went on the Presonus website and updated to the latest drivers. Mine hasn't done it since. If you have done that as well and it is still doing it, then I fear my problem may come back too. Hope not.

Jeff

Mine was working fine and now it's doing the same thing... computer can't see it anymore.