How to program my bluetooth to my cell phone - Cell Phones

Reprogram your phone using my tips and tricks :) update your firmware to make new your program and update hope it will helps you

Sony Ericsson Xperia X10 Mini Bluetooth couldn't be used to send or receive files via bluetooth, you must download and install a program that allows you to do so.

go to:
https://market.android.com/details?id=it.medieval.blueftp&feature=search_result

please rank
thanks

Use the following link

http://www.point.com/articles/2007/08/a_bluetooth_tut.php

It usually happens to Motorola K1 once the K1 is already paired up with another Bluetooth device, or if the connecting phone uses a different Bluetooth PIN code.

Make sure that your phone is not paired with another Bluetooth device (i.e. another phone or Bluetooth headset). Then try to use 1234 or 0000 as your Bluetooth PIN code.

If same problem occur, make sure that the two devices are within the Bluetooth wireless range (10 meters for Class 2).

If that did not resolve the problem, then there's a problem with the Bluetooth program in your phone. Contact the manufacturer and have them re-program the phone.

Thank you and good luck!

as far as i remember there is no bluetooth on this unit.

yes , you will need to follow directions carefully

just reload the software of your phone most probably it ll be fixed if not then u contact me again i ll give details of which hardware is defective

hie dear,
for connecting ur cell to ur pc's bluetooth, u should have either inbuilt bluetooth or external proper installed bluetooth in ur pc.
do u have?
if so, then activate the bluetooth of ur cell as well as of ur pc and search through pc's bluetooth applicaton. its really very easy, u hv to follow the instructions only.

bunty

Make sure the bluetooth is on...the password is 0000 and that should allow it to connect to the device...

Pairing your Cell Phone to your
Bluetooth Headset:

(FROM Bluetooth Headset)
1. Make sure Bluetooth Headset is fully charged!
2. Hold down talk button (center button of headset) up to
(Five) 5 seconds, then WAIT until you see a solid blue
light then immediately flip open earpiece part of headset.
THIS MEANS the HEADSET IS NOW IN PROGRAM MODE.


AT THE SAME TIME/ WHILE BLUETOOTH
IS STILL OPEN & IN PROGRAM MODE….

(FROM CELL PHONE)
1. Click on “Menu” (Left Button)
2. Scroll to Bluetooth icon. (Lower Right Hand side of menu)
3. Click “Ok” button
4. Then click on “My Devices”
5. Click “OK” again
6. Select “FIND NEW”: Cell phone searches/connects to pair up
with Bluetooth Headset.
7. Once your Cell phone discovers your new headset, select
“ADD” or click on the recently paired headset device.

8. You will then be prompted to enter a pairing code.
Use either..
a. 0000 or
b. 1111 or
c. 9999

Congratulations on paring/ connecting your new
Bluetooth Headset
w/ to your new Cell phone!