I can not receive faxes anymore the reason stated is "Memory Full' There is nothing in the manual that explains this. I hope you can help me. Thankyou Lillian

This fax machine stores the faxes in memory and then prints them out.

If it's unable to print them, is either because there is no paper or no ink.
The memory eventually gets full and stops receiving faxes.

It will depend on the model and make and you have not supplied that information.
If this information in memory was received information then the machine should print out the documents as long as there is nothing in the display saying it needs toner, paper etc, etc.
If it is not received information in memory then it can only be scanned information for copying or transmitting....again, not knowing make or model...you should be able to use your users manual and delete the pages you have stored into memory.

Try unplugging the power cord for 24 hours.

This message usually shows up when you've received many faxes and haven't printed them, or when you have attempted to send faxes but they never made it and were kept in memory for a later date.
I would search in your user's manual how to clear the memory, since each manufacturer has a different way to do this, and the machine's menuing systems also differ from one manufacturer to another.
Good luck!

I don't know what brand fax 100 is. But if the memory is full you might try the following.
Unplug the power form your unit for 24 hours and then restart it. The memory should clear itself. ( you really have to unplug it not just shut off the switch if it has one).
There are reasons why the memory got full in the first place. Either the phone line was off and transmitted documents never sent or the receive function was disabled due to a paper jam, out of paper, or toner or a spent drum.
Good luck.

Your memory might be too full. Try to delete your memory and see if that will help.

somehow you have changed the receive mode form "automatic" to " "manual" receive. Check your manual.

Hi,
I can advise you on the 'memory full' problem, mate.

If you get a MEMORY FULL message while scanning the first page of a fax, press Stop to cancel the scan. If you get a MEMORY FULL message while scanning in a subsequent page, you’ll have the option to press Start to transmit the pages scanned
so far, or to press Stop to cancel the operation. In this case, send the fax by the Manual Transmission.
Depending on your typical faxes, MEMORY FULL errors can occur frequently. If this happens, change the Memory Transmission setting back to OFF.
To do this:

Press Function/Set, 3, 9.
This should take you to MEMORY TX
and MEMORY TX: ON?
Then press either the left or the right arrow (< or >) to switch on or off, and press Function/Set.
For the next fax transmission only, press < or > to select
NEXT FAX ONLY and press Function/Set.

This will mean you don't add any more to the memory and may be able to send faxes. There is a possibility that you will only be able to fax using manual transmission, but at least you should be able to use the machine to fax at all!

I apologise if the jargon is confusing, just try to go through the process one step at a time and you should be fine.

Hope this helps :)

Chris (ziraffa)

Unplug power cord....replug power cord.

If your brother Intelli Fax 775 says..Memory full, erase message...this is what you do. Press "menu 84" then press the fax start button. Your fax will print every fax in memory and it will clear itself. To turn off the memory so this does not happen again..Press Menu then 82, then a up or down button, so it reads "off". Then the stop/exit button, and your done.