Hold down the setup button until the menu comes up. press the '6' button. press the '6' button until "expand box" is hi-lighted. press 'up/>>l' button.
worked for me. good luck.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
if evrything is ok with the dvd (make sure the dvd is working fine), you need to hook up the yellow/ blue wires and yellow / black wires one for parking breack and the other for the breack chek the diagram on top of the alpine radio .
If you hear the motor try to run but the screen will not move then the plastic slides inside are most likely cracked and warped. This will make the screen catch on the rough edges. Not sure of the part number for the assembly to replace it but this is what I just found on my unit.
you have the amp remote wire hooked to the power antenna lead instead of the amp wire on the deck otherwise just hook it to a switched +12 volt source. You sure you got a DVD changer instead of just a cd changer
Go to alpine .com and scroll to the bottom of the screen to support.Click on support then type in
cva-1003 and there you will get the manual for free.................................................!
try going to the setup up then changing the aux-1 and aux-2 setting to pal. and make sure they are on. do this by holding down settings button. then press the 1, 2, 3, 4, 5, 6 buttons till you get the right one.
the dvd player is a GME, don't know much more
have audio screen says if boxerror
×