Nav-cam 700 software - Navigator Evesham Nav-Cam 7000 GPS Receiver

In the box that came with your Nav-Cam you should find a software disk and a USB cable. Install the software on your computer and when prompted connect your Nav-Cam. Follow the on-screen instructions to update the software.

how i canfix my gps evesham nav-cam 2007 is not working just show me navigator loanding

I found mine on ebay, search evesham n30 apparently has it for the nav-cam 7000 as well, i have a nav-cam 2007

The "Origional" software will not allow you to input a street address. The newer N30 software will input street addresses, as well many more POI's, as well as via directions. I have the original software, plus the newer N30 software. Let me know if I can help! Joe

I have the cd that came with my Nav-Cam 2007, and I can send you a copy if you give me a place to send it to.

I lost my SD/MMC Card for my Navigator Evesham Nav-Cam 7000 GPS Receiver I vant to get a nother one or dowload Nav-Cam 7000
[email protected]

I have evesham nav x11-15297 and I need new chip. How can I order it ?

i need the software to both update and repair my nav cam 6200 as with out it it is of no use and it is a handy bit of kit

Evesham Nav-Cam 6200 turns on then sticks at the front page
( navigator, MP3 Photo, Setup) and won't go any further, tried
hard and soft reset but nothing happens. can you help.

I have the new N30 software, it has updated maps and updated software. You can input street addresses and via directions. Contact me and I'll give you a link to download it. Joe