The LCD screen on my Panasonic Lumix DMC LZ1 has cracked. Otherwise the camera is still working perfectly on all its settings. Please can you direct me as to where I can obtain a replacement screen. I expect I will be able to do the replacement myself. Thank you.

eBay is your best bet. Here is a quick listing I fould. Just search for your camera model and add "replacement screen". Most of these will ship directly from china.
New LCD Display Screen For Panasonic Lumix DMC TZ35 DMC ZS25 Camera Repair...

You're looking at approximately $30 for a replacement screen

http://www.rongdepot.com/products/Panasonic-Lumix-DMC%252dFX8-Digital-Camera-Replacement-LCD-Display-Monitor-Screen.html

Please rate this solution to show your appreciation!

LCD screen is damaged and replacing the lens is the solution for your camera.

Buy from here: http://www.ownta.com/panasonic-lumix-dmc-fx7-digital-camera-repairing-lcd-display-screen-replacement.html

take the battery out

Here is the link to ur camera's driver

http://www.panasonic.com.au/support/downloads/more_info.cfm?objectID=10&fileTypeID=1&productCategoryID=35&productID=3483&listQueryString=fileTypeID%3D1%26productCategoryID%3D35%26productID%3D3483


Thankyou
Appreciate a good rating from you.

Hi there.
look in the camera's settings to see if the flash is turned on, if it is and the flash still does not work you will need to take it to a service center for them to replace the halogen bulb.

Good luck and thanks for using FixYa!!

Here is the direct link for the manual.
You will have to copy the full line to your browser.

http://www2.panasonic.com/consumer-electronics/support/Cameras-Camcorders/Digital-Cameras/Lumix-Digital-Cameras/model.DMC-LZ1

If that does not work you can enter the model number here.

http://www2.panasonic.com/consumer-electronics/support

The panasonic web site is here, look under support.

http://www.panasonic.com

CCD sensor faulty especially if you can play back pictures that were captured properly, but have a blank screen in capture mode. Replace sensor and camera will work fine.

No. All Lumix® Digital Cameras have a built-in feature to conserve battery power. After a certain amount of inactivity, the LCD will power down to preserve the battery. Simply hit the SHTR button, and the LCD will turn ON.