Question about Doro Phone Easy

1 Answer

Message waiting light is blinking, no messages waiting

Posted by louise535 on

Ad

1 Answer

kakima

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Doro Master
  • 102,366 Answers

You have unheard messages on the voicemail system provided by your telephone company. This system records messages when someone calls while you're already on the phone. Please contact your telephone company for instructions on accessing their voicemail system.

Posted on Nov 26, 2014

Ad

5 Related Answers

Anonymous

  • 38 Answers

SOURCE: message light

Store Messages are probably not recorded in the mailbox that is associated with the phone. Instead, they are probably in the General Delivery Mailbox or a mailbox associated with an ICD group.

Making it possible for the GDM to turn on a message waiting lamp is something that needs to be done when the system is first installed. Changing it later requires the entire voice mail system to be cleared, unfortunately. It is one of those things we always do for our customers, but most dealers do not.


We have a support package that allows us to make all the changes you need over the Internet for a flat annual fee. If you want your whole system to work properly and all changes to be made for you at a flat budget, call us at 877-236-8376.

Posted on Oct 14, 2008

Ad
bunnydawg

Roberta Smith

  • 5158 Answers

SOURCE: Can't turn off the blinking message waiting light

Unplug the phone from power for about ten minutes and see if that resets it..i'm not sure if that uses and adaptor for power... but be aware it also gets power from the phone line as well... so unplug that too.

Robert

Please take a moment to rate this solution.. thanks

Posted on Jan 26, 2009

Anonymous

  • 1 Answer

SOURCE: Light won't flash when a message is waiting.

New phone/cable provider corrected the problem on their end. Evreything works at this time.

Posted on Jun 11, 2009

Anonymous

  • 1 Answer

SOURCE: Message waiting light

Go into the voicemail, press 5 for message waiting notification options, press 1 for message waiting light status.

Posted on Aug 13, 2008

Anonymous

  • 1 Answer

SOURCE: message waiting indicator

Try holding the mute/find handset button on the base unit for about 5 seconds and the light should stop flashing.

Posted on Jan 01, 2008

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

A few of our rooms has the voicemail light blinking. There is not a voicemail waiting and can not be cleared from the front desk or from the room.


Message Waiting Indicator Your phone's message waiting indicator is either a light or special tone that alerts you when you have voice mail.

Occasionally, the message waiting indicator may be out of sync with your mailbox. In that case, the indicator light or tone is ON but there are no messages waiting, or the indicator light or tone is OFF when there are new messages waiting.

To get the message indicator back in sync

  1. Save or delete all new messages
  2. Hang up.
  3. If the message indicator does not go out or stop within a few minutes, there may be a problem, and you should contact Verizon.
  4. If the message indicator does go out or stop, call your own number and leave a message
  5. Hang up and wait
  6. If the indicator light or tone does not come on within a few minutes, there may be a problem, and you should contact the vender.

Jun 08, 2015 | Lands Phones

1 Answer

Message light blinking,but there is no message on phone.


Pressing the Voice Mail button only checks messages on the FIRST LINE. The Message Waiting Indicator (MWI) lights of all lines. Check the icon next to your other line buttons. One should be an envelope. Press that Line Button, THEN press the Voice Mail button.

Jul 22, 2014 | Cisco Computers & Internet

2 Answers

Phones blinking


What model Uniden DECT 6.0 phone? What's blinking? The entire display or just the message light? If it's the message light then you have unheard messages on the voicemail system provided by your telephone company. This system records messages when someone calls while you're already on the phone. Please contact your telephone company for instructions on accessing their voicemail system.

Oct 17, 2013 | Uniden DECT 6.0 Cordless Phone ID

2 Answers

Message light blinking but no message there cannot remove message light


you have to log in to your account at the phone service provider and reset message waiting indicator. If you have a contract company managing your ip phone service, call them, and say you need the message indicator reset.

Mar 07, 2013 | Mitel 5330 IP Phone

1 Answer

Message waiting light will not go off


Found a user manual online. Solution is holding the "Find Handset" button in for five seconds, until the red light went off; that reset the message waitung light and message.

Jan 23, 2010 | Uniden Cordless Phone

1 Answer

I have a uniden dect1580 6.0 and the red light in the left hand corner blinks all the time.


That is the message waiting indicator, it is telling you that your Call Notes (Or whatever your service provider calls it's voicemail) has a message waiting. If you do not have a message waiting, you can turn the light of by following these steps:

Resetting the voice message waiting indicator
When you receive a new voice mail message, the new message LED on the top of the handset flashes and
appears in the handset display. In the event your message waiting light gets out of sync with your phone company’s
voice messaging system, you can manually reset it back to the “No messages waiting” state.
Press and hold FIND on the base for five seconds.
Note: The handsets connected to the base will start to beep, however, keep pressing for five seconds.
A beep sounds and the message alert tone is reset.

Jan 21, 2010 | Uniden Cordless Phone

1 Answer

The message indicator light will not stop flashing and there are no messages


The term we used for this back when I worked for the phone company was a "stuck message waiting indicator" and the way to fix it was:

Call yourself and leave a message.
Hang up and wait 2 minutes (we used to say 5 minutes, but 2 is plenty)
Retreive/delete your voice mail message
Hang up and wait 2 minutes


That should clear the blinking light.

Jul 15, 2009 | RCA 25414RE3 Corded Phone

1 Answer

Have no message but red light keeps flashing


The term we used for this back when I worked for the phone company was a "stuck message waiting indicator" and the way to fix it was:

Call yourself and leave a message.
Hang up and wait 2 minutes (we used to say 5 minutes, but 2 is plenty)
Retreive/delete your voice mail message
Hang up and wait 2 minutes


That should clear the blinking light.

Jul 09, 2009 | Uniden Cordless Phone

1 Answer

Red message light flashing


The term we used for this back when I worked for the phone company was a "stuck message waiting indicator" and the way to fix it was:

Call yourself and leave a message.
Hang up and wait 2 minutes (we used to say 5 minutes, but 2 is plenty)
Retreive/delete your voice mail message
Hang up and wait 2 minutes


That should clear the blinking light.

Feb 12, 2008 | Uniden Cordless Phone

Not finding what you are looking for?
Doro Phone Easy Logo

Related Topics:

335 people viewed this question

Ask a Question

Usually answered in minutes!

Top Doro Lands Phones Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Vernon Taylor

Level 3 Expert

6860 Answers

Brad Brown

Level 3 Expert

18438 Answers

Are you a Doro Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...