I have the $27.99 logitech headphones with mic, The headphones work but Cannot use mic with mac snow leopard osx. I have made sure my port on my mac works with another mic. Do i need a special download or something?

Creative cloud requires a newer OS than what you are running.

Is you computer connected to your route via an ethernet cable? If it is, check the port on the router to see if the connection light is glowing. Next, check you network settings and set the "Configure IP Address" to be "Using DHCP". This will also the router to allocate an IP address and settings to computer. Now see if you can access the internet.
Snow Leopard Support
Mac Basics Connecting your Mac to the Internet

hi you can run snow leopard on intel or amd pc just check apple.com for specs for mac osx snow leopard, you'll get alot of videos on youtube.com im running snowleopard on my pc that i built myself i have vista on one hdd and mac snowleopard on another hdd but i did have a problem with the sound you'll need a 3.5mm audio jack to usb adapter if your using a 3.5mm jack for sound at the moment (check ebay you'll get them cheap there ) aswell as a usb keyboard and the disc i bought from apple is single layer heres where you can find the specs for it http://www.apple.com/macosx/specs.html ...i had one other problem i couldn't get it to install on a partitioned hdd it would only install on whole hdd i tried everthing but it wouldnt work. i hope this helps im not responsible for any loss of data so be sure to back up your files..best of luck

The first thing that you need to do is to verify if your Olympus P-440 is if it's supported by Mac OSX 10.6.x (Snow Leopard). If yes, make sure that you've installed the correct driver for Snow Leopard.

You may check the link below:

http://driverscollection.com/?file_cid=41942227668e7c7e22782bc2081

This link contains a driver for Mac OSX. I assume that this driver will work with all OSX (starting from Tiger to Snow Leopard). If this driver will not help, you may need to contact the manufacturer, and verify the system requirements of your printer.

Thank you and good luck!

Yes it is very easy to do as you are running a Mac with Intel Processor. You have Mac OSx Leopard with updates 1,2, & 3. To upgrade to Mac OSx Snow Leopard you must buy the upgrade. Go here: http://www.apple.com/macosx/ On the top right click (Buy Now) You will have to pay $29 which is a bargain. Once you get the upgrade on CD simply follow the directions for the simple upgrade. I did the same thing when Snow Leopard came out. It is well worth the $29.

You need to update your driver by getting the latest software in the Lexmark website here. During software update what usually gets updated are the basic functionalities. In this case it looks like the scanner is not being updated as well. Hope this helps.

go to folowing link for your drivers

http://www.opendrivers.com/company/2660/smartdisk-free-driver-download.html

This is the best solution for that problem and works perfectly...
http://blog.ragnarson.com/2010/01/mac-and-hp-laserjet-1018.html

Any Logitech wheel should be detected by OSX Leopard or Snow Leopard - no drivers needed - in OSX, it's more the game that supports the controller than the OS itself that does.

For users of Print Explosion Deluxe 3 on a Mac, Nova Development has acknowledged that the software has bugs running on Leopard or Snow Leopard. The software does crash after each operation if you do not save. I filed a complaint with the NYS Attorney General's office, to which Nova's reply was not honest Contact your state's Attorney General and let them know that Nova is selling software that has basically been sitting on store shelves for two + years, and they never tested it with Leopard and Snow Leopard. They should be required to accurately tell us what OS a software product runs on.