Ifp-795 when i'm connecting the player it's not being detected on the system.do i need to change any of the settings in the player?

You can download the iFP-700 series manual from the manufacturer's web site at
http://www.iriverinc.com/lounge/loungeView.asp?selectPart=03&findWord=&sno=447&page=1&cateCode=03

drivers.myfreewares.com/freedownload-33086-iriver-ifp-790-ifp-795-ifp-799-mp3-player-firmware-v1.65-manager-version-download.html here you go :)

The iFP-795 is a player that has connection type UMS
(also called MSC): seeing the player as a removable disk:
Go to next site to see the connection type:
http://www.iriver.com/flash/index.asp?code=0300
and click on connection. Scroll down to see the iFP-700 series listed in the connection type UMS.
UMS = Universal Mass Storage
MSC = Mass Storage Class

With XP sp3 the computer Operating System has setup USB connections with new drivers, that support both UMS (= MSC) and MTP connections.
MTP = Media Transfer Protocol

When you experience next making connection:
Connecting the device to the computer Wizard found new hardware pops up.
Only this time the Windows update searching for software will not work on automatic routine: ending up with "Cannot Install this Hardware".

Manual performing the wizard, setting the device to USB connection type:
1. Can Windows connect to Windows Update to search for software ?
Select "No, not this time".
[Next]
2. If your hardware came with an installation CD, or floppy disk, insert it now.
Select "Install from a list or specific location(Advanced)."
[Next]
3. Please use your search and installations options.
Select "Don't search I will choose the driver to install."
[Next]
4. Select the device driver you want to install for this hardware.
Select "USB Mass Storage Device."
[Finish]

Just post a comment if you need more help.

Solution is given here and it works: I just did it for my beloved IFP-795...
http://iriverinc.com/vista/

a) Have you tried finding updated Driver for your Windows2000?

b) Have you performed Firmware Update?

See Jan Karlsbjerg's blog at http://www.jankarlsbjerg.com/blog/archives/2007/03/26/ums-firmware-for-iriver-ifp-89x/

BUT NOTE, that Jan was talking about 895 model. Follow similar steps, but use firmware for YOUR 795 model (find it via web search).

Try here:
http://www.opendrivers.com/driver/233084/iriver-ifp-790-ifp-795-ifp-799-mp3-player-firmware-v1.85-ums-version-free-download.html

Dear Bhuwan,
you can download the music manager software for your IFP-795 ,from this site:

http://www.iriveramerica.com/support/ultra/iFP-manager-pc.aspx

for download this software you have to just click on iriver Manager 3.16


Regards

http://www.opendrivers.com/driver/233084/iriver-ifp-790-ifp-795-ifp-799-mp3-player-firmware-v1.85-ums-version-free-download.html

the iriver series by default is not detected as a usb drive. iriver music manager is needed to transfer files. After a firmware upgrade, the device is usable as a usb hard drive. But you need the music manager software to upgrade

iriver.com has all the software availble to make it work on your p.c. Go to the website and search ifp-795. Download and install the software, you should be fine. You might be prompt in the instalation process... remember "install or continue anyway" good luck.