Hi Guys, I have a sanyo XE31 projector, i am getting pink spots in corner the same as this one listed on ebay (see link) http://cgi.ebay.co.uk/Sanyo-PLC-XE31-LCD-Projector-with-remote-01_W0QQitemZ260738202467QQcategoryZ22610QQcmdZViewItemQQ_trksidZp5197.m7QQ_trkparmsZalgo%3DLVI%26itu%3DUCI%26otn%3D4%26po%3DLVI%26ps%3D63%26clkid%3D7407778745388186311 Any ideas? i am fairly technical and am confident on disassembling the projector Many thanks Matty

Have a nice day!
We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel,
motherboard, powersupply ... with high quality and competitive price.
Jerry
Lampdeng Limited

The DLP chip is failing. If it is still under warranty, contact the warranty section on Sanyo's web page.

1, the lamp is ok
2,the lamp ballast is ok
3,seems that the power supply or mother board is defective

the Blue Lcd panel was broken, the price of the panel is USD80

Have a good day!

We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel,

motherboard, powersupply ... with high quality and competitive price.

Jerry Lampdeng Limited

1,the lamp and the ballast is ok
2,it seems the motherboard is broken.
We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel,
motherboard, powersupply ... with high quality and competitive price.
any questions, feel free to contact me
have a nice day!
Jerry Lampdeng Limited

1,Check the fans ,whether the fan is running,when you turn on the projector
2,if the fans run, then ,check the lamp or lamp ballast
We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel,
motherboard, powersupply ... with high quality and competitive price.
any questions, feel free to contact me
have a nice day!
Jerry Lampdeng Limited

1,Turn the projector on,
2,Press and hold the "Power" button for 30 seconds.
We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel,
motherboard, powersupply ... with high quality and competitive price.
any questions, feel free to contact me
have a nice day!
Jerry Lampdeng Limited

1, the lamp is ok
2,the lamp ballast is ok
3,seems that the power supply or mother board is defective

We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel,
motherboard, powersupply ... with high quality and competitive price.
any questions, feel free to contact me
have a nice day!
Jerry Lampdeng Limited

My friend, i'm sorry and i hope your sitting down. The person who made the decision to change out the products was not educated about projection enough to make this decision. Let me explain. Your previous projector was 3000 lumens, and had better contrast, but had a lower resolution. The replacement projector was 1500 lumens and poor contrast, but higher resolution. You have basically halfed, your output brightness. The decision maker went the wrong way for this product selection. Brighter is better in the education enviorment.

The good news is lcd projectors only last about 4000 operational hours so you can replace them with a dlp product that will last 8-10 years. good luck

Good luck

Sorry if this is a bit late...

Hold down the MENU and IMAGE buttons on the remote for more than 10 seconds and the remote toggles to the other projector.

Banni