Question about Konica Minolta Di1610 Copier

3 Answers

When i turn on my minolta di1610, lcd show me error ''Caution.Paper jam. Open front cover''. What's that and how i can fix it? Please help and sorry for my english 1. Power the machine OFF. 2. Press and hold the STOP key. 3. Power the machine ON. Release STOP after 5 seconds. No working

Posted by kersulizzz on

Ad

3 Answers

Tareq Bin Mostaq

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

  • Expert
  • 199 Answers

Please see cassette may paper miss feed

Posted on Feb 03, 2018

Ad

Richard Lilja

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 400 Answers

Hello kersulizzz;
I believe that you would benefit from the whole manual.
Konica Minolta Di1610 User Manual

You will find the paper jam section around page #6-16 (#110 as it is laid out). You may want to download it for future use on your computer.
Good Luck!
Rich Lilja

Posted on Feb 03, 2018

Ad

Darren Ross

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that has over 10 points.

  • Contributor
  • 4 Answers

Front cover is placed on front of machine. Should be some tabs near top, or on either side. If not, use finger nails or thin sturdy tool or object to pop open. Should be very little resistance. Don't force it. Should see all the guts of copier or whatever it may be. Usually can see the paper stuck in there. Good idea to unplug and try pulling jammed paper out. Close and restart.

Posted on Feb 03, 2018

3 Related Answers

firecontrol7

Norman J Weimar Jr

  • 6960 Answers

SOURCE: I have di1610 wont at all error ligth are flashing

Description
Machine may cycle ON/OFF repeatedly (keeps rebooting), will not power ON (no boot-up), no message on the operation panel, LCD displays extraneous
characters and/or error code C14A3 (C-14A3).
Solution
CAUSE: The PCL board draws too much current, causing PWB-P to fail. There is no problem with GDI versions of the machine; only machines with PCL
boards are affected.
SOLUTION: The PCL board has been modified to limit current draw. If the symptoms described above occur, replace both the PCL and PWB-P boards.

Note : The new-style PCL board can be identified by a yellow sticker. Machines that had the new-style board installed during production have a yellow
sticker near the serial number plate.

may want a service technician to check the PCL boards as above



Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Posted on Aug 08, 2009

SOURCE: IError Code C13FO on konica minolta Di1610

C13F0 - Laser error
The laser output exceeds the upper limit value.
The laser output remains lower than the lower limit value.

Posted on Aug 23, 2009

SOURCE: How do I input ip address in Minolta DI1610

press the Utility/Counter -> Network Settings -> IP address

Posted on Aug 23, 2009

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Unable to print 70


  1. Open the Outer Back(Rear) Cover (1) at the back of the machine. Pull the jammed paper out of the machine.

    jam03.gifjam04.gif
  2. Close the Inner Back(Rear) Cover (1) if it is open as shown in the illustration.

    jam06.gif
  3. Close the Outer Back(Rear) Cover. Make sure the cover is closed properly.
    jam07.gif
  4. Pull the paper trays (1) out of the machine.

    jam01.gif
  5. Push the two green levers up on both sides.

    greenlever.gif
  6. Pull out the jammed paper (1) and press Stop/Exit.

    jam02.gif
  7. Push the green duplex unit up.

    greenduplex.gif
  8. Reset the machine by lifting the scanner cover from the front of the machine and then closing it.
    If you cannot remove the jammed paper from the front of the machine, or the error message still appears on the LCD after you have removed the jammed paper, please go to the next step.

  9. Using both hands, use the plastic tabs on both sides of the machine to lift the Scanner Cover (1) into the open position. Make sure that there is no jammed paper left in the corners of the machine under the plastic covers.
    jam08.gif

    Note
    • If ink gets on your skin or clothing immediately wash it off with soap or detergent.

    • If the paper is jammed under the print head, unplug the machine from the power source, and then move the print head to take out the paper.

    • If the print head has stopped in the right corner as shown in the illustration, you cannot move the print head. Press Stop/Exit until the print head moves to the middle. Then unplug the machine from the power source, and take out the paper.

    jam09.gif
    1. Gently close the scanner cover using the finger holds on both sides of it as you push down on the Scanner Cover Support (1).
      jam096.gif
    Caution Be careful not to trap your fingers under the scanner cover. Always use the finger holds provided on both sides of the scanner cover when opening and closing it.

    1. Push paper tray #1 and paper tray #2 firmly back into the machine.

    Note Make sure you pull out the paper support until it clicks.

    jam11.gif

Nov 11, 2011 | Brother MFC-6890CDW Printer

1 Answer

How do i clear paper jam


If there is paper trapped physically then it must be removed mechanically by removing the roller assembly and resetting. You need to check forr pieces of paper that have jammed or is obstructing the sensor as it displays the error.
Now if there is no paper locked within it can be failure of the optocoupler sensors that is causing the error. There are placed at the take up paper in-detect section and can be confirmed using a test for continuous voltage feed from the sensor.

Sep 16, 2011 | Konica Minolta Di1610 Copier

1 Answer

It said to open from cover and remove paper I did and It dont work


If you receive an "Open front cover" error message the solution is to open the cover and remove the paper and any remnants of the paper jam. If there is no obvious paper remnants jamming the printer and you continue to receive an error message I would suggest unplugging the printer from the power source.


After 5 - 10 minutes plug in to power source.


Turn on printer.


See if this has resolved error message. If not you will need to check more carefully for paper remnants that would be causing the printer to detect a jam.



Trust this is helpful. :)

Dec 08, 2010 | Konica Minolta PagePro 1390MF All-In-One...

2 Answers

Error during 1st install of paper


konica minolta magicolor 1680mf service call 0094
Help me

May 30, 2010 | Konica Minolta magicolor 1680MF -...

3 Answers

My brand new machine Bizhub 211 have paper jam problem


COF32 means the ATDC sensor has detected some unusually high or low readings.
The ATDC sensor measure the toner lever inside the developer unit.
Try swithcing on/off, open/close the front door to clear the code.
If this doesn't work, you'll need an engineer to reset the ATDC level.

Good luck

Tam

Apr 12, 2010 | Konica Minolta bizhub 250 All-In-One Laser...

1 Answer

1st side cover is open


Hello sir; Are you using duplex unit, check your duplex unit.

Oct 13, 2009 | Konica Minolta Office Equipment & Supplies

2 Answers

Canon error code 6000 in mx308


please help me. i have canon print mx308. the have paper jams. paper has the full out from print. how i can finish the problems?

Jul 25, 2009 | Canon Pixma MP450 All-In-One InkJet...

2 Answers

Konica Minolta Bizhub 920


You need to set machine for extra cassette.

Nov 23, 2008 | Konica Minolta Di1610 Copier

1 Answer

Help! i get the "Machine Trouble" error


are you sure thats the right trouble code? reboot machine holding down the STOP button. this may reset this error

Dec 04, 2007 | Konica Minolta Di1610 Copier

Not finding what you are looking for?
Konica Minolta Di1610 Copier Logo

Related Topics:

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6960 Answers

carpediemweb

Level 1 Expert

54 Answers

George Mclaughlin

Level 2 Expert

369 Answers

Are you a Konica Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...