KX-T7730 Hi Again Did that, still c ant hear no music. When i press 1 on the phone i can hear the music but not when i put someone on hold.

If you're reading the programming instructions in order, keep going :-) I have no clue what SLT hold mode has to do with music on hold or background music, but when you get to 111-BGM-Music On Hold source, you can set it to external and you're in business.

Carl

Hi,

You can find detailed information about your phone from the given link below.
Panasonic KX-T7730


Check the steps below for "Does not Ring" solution.

Depending on your model system, it may or may not be possible. I included the two different methods to change the ring tone below depending on your system. Give it a try.

KX-TDA Systems
KX-TD Systems
Press PROGRAM
Program Press the CO Line key you wish to change
Press the same key again, enter the tone number (01 through 30)
You will hear the tone associated with the tone type number. For example, if you press 02, you will hear the tone associated with tone type 22. Press each number (01-30) until you hear the tone you desire.
Press STORE
The tone is now stored for that line on that phone only.
Press PROGRAM 99 (or PAUSE 99 if you do not have a PROGRAM button
Press the CO Line key you wish to change
Press the same key again, enter the tone number (1 through 8)
You will hear the tone associated with the tone type number. For example, if you press 2, you will hear the tone associated with tone type 2. Press each number (1-8) until you hear the tone you desire.
Press STORE
The tone is now stored for that line on that phone only.



* Please rate this solution with Thumbs up and Testimony to help us improve providing support

If that "continuous sound" matches your hold music, then, without picking up the handset, press "1"

Carl

Press "1".

If someone pressed "1", it will play your hold music. Just press "1" again to deactivate.

Basically, there are 2 ways of programming the date
and time - the short way and the long way.
If you are using the KX-T7730 phone on a Panasonic
KX-Txx 308/824 system:

SHORT WAY:
From the Switcboard / Main telephone
( ext 101, 10 or 9 ) with the handset on the
cradle/hook:
1. Press PROGRAM 0
2. Enter Date and Time
( The format is: yymmdd,
1 to 7 1=Monday 2=Tuesday etc, hh:mm,
0 or 1 0=AM 1=PM ) see example
3. Press AUTO DIAL / STORE to save your changes
4. Press PROGRAM to exit program mode

EXAMPLE:
If the date and time is 3 February 2010 Tuesday 2:15 pm you will enter as follows:
100203 2 02:15 1

LONG WAY:
From the Switcboard / Main telephone ( ext 101, 10 or 9 ) with the handset on the cradle/hook:
1. Press PROGRAM * # followed by the system
password ( default is 1234).
2. Now press 000 and then SP-PHONE.
Enter the year.
3. Scroll to the month with the right scroll key
(located at the right bottom corner of the phone).
To change the month use the AUTO ANS / MUTE
button.
4. Now scroll right again and change the date and
day.
To change the day, again use AUTO ANS / MUTE
5. Scroll right again and the time will appear.
Set the time.
To change am/pm scroll to it, and again,
use the AUTO ANS / MUTE button.
6. Press PROGRAM to exit program mode and you
are done.

With the handset still on the cradle press 1 until the music is off.
Please rate answer if it was helpfull
Thank you.

hi pgoyal

During a two-party conversation,
1. Press CONF button. (The current party is placed on hold.)
2. Enter the phone number of the third party.
3. Talk to the third party.
4. Press CONF button again.
A three-party conference is now established.

Ali

The solution is press 1 on hook condition. this is Back ground music .

walk up to the phone and without touching anything else, press "1".

No music.

Carl

select hold 2 for external music source then autoans to store.