Need User Guide for Meridian 7208 Phone from 1987. Need to be able to change time, display name, etc.

Question edited for clarity and spelling of 'Meridian'.

Page 59 of the Manual refers Volume Bar and Program.

Meridian Digital Telephones User Guide

https://drexel.edu > phoneDocs > 2616FullManual
PDF
Apr 24, 2022 - User Guide. Enterprise Solutions Documentation. Nortel Knowledge Netw ... Selecting a position for your Meridian Digital Telephone .

From the idle 7310, press FEAT *2 the button and dial their extension.

If you get a nasty notification, like Denied in Admin, or Set Locked, you'll need the system administrator password and procedure to unlock the phone..

Carl

The following website will help you with the operation and programming of your 7316:

http://www.telephonemagic.com/phone-support/norstar-feature-programming-code.htm

This link will allow you to display and save a copy of the 7208 User Card:

http://telecommunications.tamu.edu/userguides/M7208_16.pdf

Finally this link will take you to a site that will have user cards for the phones as well as manuals for the programming of the Norstar Call Manager User Guide:

http://www.alphatelecom.ca/meridian_norstar_manuals.htm

These steps should allow you to resolve your issue. If you do have further problems please don't hesitate to let us know. Thank you for the opportunity to assist you in resolving your issue.

The M2008 set (NT9K08AD03) doesn't work on a CICS system. It works with the Meridian PBX systems. The type of sets that work with a Compact ICS system are M 7100, 7208, 7310, 7324 and T 7100, 7208, 7316, 7316e as well as some of thier cordless sets.

you will need the installers password and that is **266344 or **config. After you are in the system scroll through untill you get to dial mode than change back to pulse. If you cannot get into the system with that password someone has changed it. The password i have given you is the default password and 99.9% it is not changed. If it has been changed and you don't know it go to the phone system it might be tagged or marked on the system itself alot of techs do it that way.

Without picking up the handset, press program *# 1234. 003. keeping pressing the speaker phone until the extn u want to change is displayed. Note down the jack no.

Then press hold and 004. Then press speaker phone 1 time and enter the jack no of the extension whose name has to be changed. then change the name. After you finish entering the name press autodial.

you would need to get into the admin programming to change the name, have your system admin person make the change for you.

There is a directory button on your Meridian-press this button and press the down arrow key until the name is displayed in the display window and press your left arrow key to change the name and number after making the correction press your save button to store.  I hope this helps.

I have a User Guide if you still have the phone set. Post Solution hugh

Dear sheryl498,

Your phone is designed for a PBX (Private Branch Exchange) unit like the Compact ICS or the 6x16 TCU that was at the office. It is not compatible with regular POTS lines or standard home lines.