Schiller Cardiovit At 2 Light Ecg Machine Logo

Related Topics:

Posted on Feb 22, 2011
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Upon pressing the AUTO PRINT the EKG tracing only gets I II III, AVR, AVL AVF and then stopped printing. I was not able to obtain the tracings from the chest leads (V1 to V6) . Please send me advise or intstruction on what to do to acquire the full 12-lead EKG tracing.

Answer This Question
  • 1 more comment 
  • medicje Feb 23, 2011

    I think so. However, please give me the detailed step by step instruction from turning the machine "ON" switch until I am ready for the "AUTO PRINT" button. Thank you!!!!!!!!.

  • medicje Feb 23, 2011

    If I am not following the proper operating instruction for the EKG machine please send me a clear detailed step by step procedure from turning the POWER SWITCH "ON" till I am ready to press the "AUTO PRINT" Button to acquire the proper EKG tracings.

  • medicje Mar 02, 2011

    I need step by step guidance for the proper set -up of the EKG machine. Instructions in the manual are so vague to set-up the machine.

×

3 Answers

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points
All-Star:

An expert that got 10 achievements.
MVP:

An expert that got 5 achievements.
Vice President:

An expert whose answer got voted for 100 times.

  • Master 797 Answers
  • Posted on Mar 05, 2011
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points
All-Star:

An expert that got 10 achievements.
MVP:

An expert that got 5 achievements.
Vice President:

An expert whose answer got voted for 100 times.

Joined: Jul 26, 2009
Answers
797
Questions
2
Helped
190993
Points
2336

Have you contacted Schiller America for support? I contacted them for an operators manual but then saw that you state the manual is too vague. I would suspect that they will be able to pin point the problem and if you mention that the manual is unclear in this area they may update the manual.

Here is the link to their website schiller-america

Good luck, Jim

Tudor Valean

Tudor Valean

Level 3:

An expert who has achieved level 3 by getting 1000 points
All-Star:

An expert that got 10 achievements.
MVP:

An expert that got 5 achievements.
Vice President:

An expert whose answer got voted for 100 times.

  • Master 787 Answers
  • Posted on Feb 23, 2011
Tudor Valean
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points
All-Star:

An expert that got 10 achievements.
MVP:

An expert that got 5 achievements.
Vice President:

An expert whose answer got voted for 100 times.

Joined: Feb 15, 2010
Answers
787
Questions
0
Helped
158171
Points
2165

Have you selected the right program?

Ad

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points
Superstar:

An expert that got 20 achievements.
All-Star:

An expert that got 10 achievements.
MVP:

An expert that got 5 achievements.

  • Master 4,234 Answers
  • Posted on Feb 25, 2011
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points
Superstar:

An expert that got 20 achievements.
All-Star:

An expert that got 10 achievements.
MVP:

An expert that got 5 achievements.

Joined: Mar 17, 2008
Answers
4234
Questions
2
Helped
1563465
Points
12312

Since this is a medical device and is responsible for the proper treatment of a patient, it is not proper for anyone to respond here. This could be a fault of the machine or improper setup. Your best course of action is to contact the manufacturer directly for more information and corrective action. Fixya is not allowed to dispense medical advice. Proper use of this device constitutes medical advice. Please seek assistance from the manufacturer.

Thanks,
Dan

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

ARE ECG'S SAVED IN THE MACHINE AFTER USING THE AUTO PRINT BUTTOM? ARE WE ABLE TO REPRINT A ECG FROM ANOTHER DAY?
Is there a "retrieve button"? Usually tracings are downloaded to disc after each EKG.
Read full answer
Feb 26, 2018 • Ecg Medical
0helpful
2answers

Our brand new Contec ECG 1200 is tracing way to lightly. Can barely read. The unit is registering full charge. Also is not printing patient data. Help!
I copied this from an old question similar to yours:
Ekg machines print on thermal paper, This means that the impression is made by the print head heating the paper. If the print head is not making contact with the paper, you will get a faint tracing or no tracing at all. This needs to be adjust by a technician. Contec is located in China and we are a dealer. If you need their info or want us to look at it for you (for free) simply give us a call

Discount Cardiology
805-484-9985
Read full answer
Jan 16, 2017 • Contec Medical
1helpful
2answers

ECG MAC 1200 does not print leads III, aVF, V3 and V6, although they are shown on screen
I would reset the machine to factory defaults. Leads to be printed can be manipulated but the factory setting is to print a full 12 lead.

settings-> system setup-> restore defaults-> yes -> hit start until you are back at the main screen and hit print again ( to get a print out)

If it still wont print all 12 leads call us: Discount Cardiology 800-507-8244
Read full answer
Sep 05, 2012 • Ge Medical Systems Ge Marquette Mac 1200...
1helpful
2answers

New Contec ECG 300EG model no tracings appear on the EKG paper.
Ekg machines print on thermal paper, This means that the impression is made by the print head heating the paper. If the print head is not making contact with the paper, you will get a faint tracing or no tracing at all. This needs to be adjust by a technician. Contec is located in China and we are a dealer. If you need their info or want us to look at it for you (for free) simply give us a call

Discount Cardiology
805-484-9985
Read full answer
Aug 18, 2012 • Contec Medical
0helpful
1answer

Schiller AT-Plus, I cannot get all leads to print in sequence I avr v1 v4 II avl v2 v5 III avf v3 v6 not sure what a student did to change the...
The unit is apparently printing out in Cabarra sequence. To restore the correct lead sequence, do the following: Hit the ALT key followed by 7 then 1, hen the stop key. This will restore standard lead sequencing.
That is the start of the battle. If you desire a 3+1ryth format with a lead 2 at the bottom, which is our standard format, then you have more to do. For this format hit the ALT key followed by 1 then 0 followed by the stop key.to set the ryth lead to lead II at the bottom of the page, hit ALT followed by 3 then 8 then 2 followed by the stop key. If your filters are not enabled hit Alt 5 6 stop, alt 5 8 stop, Alt 8 3 stop, ALT 8 1 stop.Do a test print after all of this and be certain the unit is configured to your taste prior to a live patient.
Read full answer
Jun 14, 2011 • Schiller Welch Allyn Cardiovit At 2...
1helpful
2answers

Just ordered a schiller at1 ekg machine, just realized it is 3 channel, does it have a 1 channel mode where just one tracing will print?
hi,
u can make it single channel one by changing its setup. it will print single trace in the same paper. when u select this option it use more paper than the three trace.
ok
Read full answer
Dec 06, 2010 • Schiller Cardiovit At 1 Ecg Machine
0helpful
1answer

My ecg machine produce faint tracings
Do you mean when you print? If it's when you print then clean the print head or replace it.
Read full answer
Mar 09, 2010 • Medical
0helpful
1answer

Lower half or EKG would not print properly
You should purchase a printer kit. This is a common problem I have encoutntered on this machine and this machine is identical to the Seca CT6I. I have ordered the printer kit from Seca in the UK, the part number is 9740490024 at a cost of £70. It is a straightforward repair.
Read full answer
Sep 07, 2009 • Schiller Welch Allyn Cardiovit At 2...
0helpful
1answer

The machine is operating in manual mode when the mode is shifted to auto there is no ecg trace on the display. Also when the ecg print is give on manual mode the machine switches off & gets restarted
You can press delete and restart the machine. Sometimes you may have to hit the machine a couple of times. I have even kicked and it worked. All the best
Read full answer
Apr 16, 2009 • Ge Medical Systems Ge Marquette Mac 1200...
0helpful
2answers

Schiller AT-2 EKG
Hello Genesis3kr, You changed the mode by selecting automatic for the 12 lead function rather that the manual. I suggest an operational inservice from your local Biomed Technican or education dept. If nether is available than contact 'http://www.schilleramerica.com' select 'Contact" and request a local company rep for one and bill your education or Biomed dept. (been there do that). Good luck. Please inform me of the out come.
Read full answer
Oct 23, 2008 • Schiller Welch Allyn Cardiovit At 2...
Not finding what you are looking for?

View Most Popular

Cardiovit At 2 Light Ecg Machine

  • Medical

Related Question

ARE ECG'S SAVED IN THE MACHINE AFTER USING THE AUTO PRINT BUTTOM? ARE WE ABLE TO REPRINT A ECG FROM ANOTHER DAY?

  • Ecg Medical

Related Topics

249 views

Ask a Question

Usually answered in minutes!

Popular Questions

What's the difference between a single channel

Schiller Cardiovit At 1 Ecg Machine

How do you set time and date on schiller at2 ekg

Schiller Welch Allyn Cardiovit At 2...

The schiller at 2 plus ecg machine not printing ecg

Schiller Welch Allyn Cardiovit At 2...

My question is , i have 4 Argus LCM PLUS PATIENT

Schiller Welch Allyn Cardiovit At 2...

AT2+ doesn't print

Schiller Welch Allyn Cardiovit At 2...

Top Schiller Medical Experts

john h

Level 3 Expert

29494 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66827 Answers

Don A
Don A

Level 3 Expert

4401 Answers

Are you a Schiller Medical Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...