How do i get my tv back to home mode when it is in retail mode

To get your LF2612D 26" LED TV combo out of home and retail mode, you can try the following steps:

1. Press the "Menu" button on your remote control to access the TV's settings menu.
2. Use the arrow keys on your remote control to navigate to the "Setup" or "Installation" option.
3. Look for an option called "Home/Shop Mode" or "Retail Mode". If you find this option, select it.
4. Change the setting from "Shop" or "Retail" mode to "Home" mode.
5. If you cannot find this option, try resetting your TV to factory settings. This can be done through the TV's settings menu or by pressing and holding the power button on the TV for 10 seconds.
6. If the issue persists, refer to the TV's user manual or contact the manufacturer's customer support for further assistance.

Question edited for clarity.

Check out the video and the articles.

https://www.google.com/search?q=Emerson+LC220EM1+flat+screen+TV+out+of+retail+store+mode

..

Take it back to the floor.

Press menu on your Emerson tv,scroll down to features, look for location,press location and under retail you'll see home. You should be back to normal then :)

Your TV is in store demo mode.

To fix this, access the TV's menu and find the option to run initial setup. At the beginning of initial set-up, you'll be asked whether or not the TV should be put into Home or Retail mode. Choose Home.

Hello
Do connection to the antena if you wants to set the TV auto tuned.
During this initial setup, you can perform the following:

1 Select the language for the on-screen display text.
2 Select HOME or Retail mode. [Here you have to select "Home" mode if the set displays "Retail"

3 Connect cable or antenna, then select OK to run Auto
Program

• If you have cable and antenna available, please connect cable first.

• IMPORTANT: Auto Program is only effective when cable or

antenna is connected. If you cancel Auto Program before completion some channels may not be
available.

4 Auto Program will scan for available channels from the signal source directly connected to

the TV's CABLE/ANTENNA input and may take sometime to complete the process. Follow
the help text provided on the screen to run Auto Program.
OK.

More than likely the TV is in the "retail" mode which intentionally reverts to the "vivid" mode after a short period of time on the other settings, deemed best for retailer display puposes.

Follow the "return to factory settings" instructions found in the operators manual, pg 21 of KDL52S5100. Only the first half of the instructions are needed to put the TV in "home" mode, the 2nd slection to make after "language. After you have slected "home" I do not beleiev you need to any go further into the setup menu.

"Turn the TV on. Press and hold the "^" (up arrow) button on the remote and then push the "Power" button on the TV. Release the "up" arrow."

You should now be back to start, select langauge and home mode and then exit.

You now should be good to go and your picture mode selections should now stay put.

Sony has live tech help "chat" and I would suggest using them if this doesn't get it done - but I'm 99.95% sure this is your fix.

Question What should I do if my TV is stuck in Retail mode? Answer Your TV may have been set to Retail Store mode, which is mainly used on the shop floor.
For home use, we recommend that you set the TV to HOME mode, which will allow you to change the settings.
To change to HOME mode follow the steps below.

1. Press the 'MENU' button on the remote control to access the main menu.
2. Move the cursor down to select INSTALLATION and move the cursor right.
3. Move the cursor down to select PREFERENCES and move the cursor right.
4. Select LOCATION and move the cursor right.
5. Move the cursor up/down to select HOME and press the 'OK' button for confirmation.
6. Press the 'MENU' button to exit the menu.

go in menu and change it to home