Your call could not be completed because the call was routed through an intermediate network that does not service the far site. contact your network administrator for assistance

I did not see that manual on the Skmei web site below:

https://www.skmei-watch.com/index.php?route=information/information&information_id=33

https://www.skmei-watch.com/index.php?route=product/product&product_id=932

Contact them by completing the web form on their web site for a copy of the manual:



https://www.skmei-watch.com/index.php?route=information/contact#contact_form

only point to point routes on this model. You can just add some intermediate points if the route is active

VPN connections are encrypted, this adds extra overhead to the connection and an extra place all data must route through.
Once connected to a VPN your speed is determined by the slowest connection between you and your end point (The site you're visiting, or the service you are using)
For example:
If your home / business connection is a 20mb but your VPN is a 1MB connection, then your speed is going to be less then 1mb once you connect through the VPN.

Encrypted traffic is usually a bit slower, however if you feel speeds are far slower then they should be, you will need to contact the vpn service provider and see if any settings in your VPN software can be changed to speed things up.

A routing loop is a condition in which a packet is continuously transmitted within a series of routers without ever reaching its intended destination network. A routing loop can occur when two or more routers have routing information that incorrectly indicates that a valid path to an unreachable destination exists.
The loop may be a result of:
Incorrectly configured static routes
Incorrectly configured route redistribution (redistribution is a process of handing the routing information from one routing protocol to another routing protocol and is discussed in CCNP-level courses)
Inconsistent routing tables not being updated due to slow convergence in a changing network
Incorrectly configured or installed discard routes

Turning On: Press the On/Off Button for aprox. 2 sec. Both icons will flash intermediately to indicate the headset is powering up.

Turning Off: Press the On/Off Button. When both icons flash intermediately and then go out, the headset is off.

For a complete guide or to see the full user manual try this site...
http://www.jabra.com/Sites/Jabra/na-us/Headsetsupport/Pages/JabraBT2080.aspx

I am not sure but I believe the IP address is not correct. The trace goes to the following address:

Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} Tracing route to 200-100-1-5.dsl.telesp.net.br [200.100.1.5]

on my machine. This is only a service provider I believe and not an end website. Have you checked and verified the ip address with the contact organization? Just because you can run a trace route on an ip address does not make accessible.

The cisco could also be blocking the outbound connection at your end.

Hope this helps.

the term is waypoint and these can be set up in your route from the menu screen

Use the Sonicwall configuration wizard..

Please find below is to configure what ever you want.

Setup Wizard - This wizard will help you quickly configure the SonicWALL to secure your Internet connection. Once completed, you can use the SonicWALL Web Management Interface for additional configuration.

Registration & License Wizard - This wizard will help you register you and your firewall with mysonicwall.com and obtain licenses for additional Security Services features.

PortShield Interface Wizard - Segment and configure the integrated managed LAN switch of the SonicWALL.

Public Server Wizard - Quickly configure your SonicWALL to provide public access to an internal server.

VPN Wizard - Create a new site-to-site VPN Policy or configure the WAN GroupVPN to accept connections from the SonicWALL Global VPN Client
Thanks
..

This is a very specific problem that requires a site visit to solve, there are many factors that can effect the transmission of data over a run of that length. There are many solutions to this problem, they range from rerouting the cable run to avoid sources of interference to selecting another medium such as WLAN or IrLAN. The specific implementation of the solution must be custom tailored to the situation, sometimes the solution requires equipment that is readily available on a store shevle and sometimes the solution must be engineered to accommodate the needs.

I would recommend looking at the cable route to see if it runs past any major interference makers (copiers/large office machines, industrial equipment, power equipment). Then look at the possibility of an intermediate repeater/router (protected location and availability of power outlets). Another possibility is a wireless technology, the specific technology depends on many factors. If you need high speeds or large data transfer, perhaps an Ir (Infra-red) link or WiMAX (802.16) would be best. If general purpose network connectivity is needed, then a standard 802.11 a/g WLAN will suffice. I recommend that you contact a local networking firm for a detailed consultation. Another resource that might be a better fit for most small budgets will be to contact the local college/university that has a well defined IT program to solicit members of the Alumni in a networking degree field.