I have a little problem with my siemens gigaset SE568, here all led lights are glowing except the internet, i checked my net connection with another modem and the result was positive but what is the problem here i can't figure out,please help me,rahat
Can someone please send the driver to [email protected]
How to check the IP Address.
To reset this router, there is a reset button at the back of the unit, use any metal or pin with the small tip push the button for at least 10 seconds while the router power on, pull the pin and check the router if all LED lights on, you will successfully reset your router.
If your router keep resetting, this is due to unstable dsl signal, contact your service provider to check this problem, maybe there is a problem with the port termination.
About security setting, you can set security key at any options by entering 10 digits number, goto network options and click wireless setup wizard, enter the SSID or router name, click next unit security option appear and select enable then input shared number at least 10 digits and click finish.
Changecode
SOURCE: Reseting the admin password on siemen gigaset modem
Usually at the back of the modem has an inside button (it has the tag "reset") that u can push it with the help of a object that has a point. (e.g pencil).
SOURCE: by which ip using i can open the config page of
First connect the router to your PC, click Start menu button on taskbar click run type cmd now type ipconfig, see the Default Gateway address, open your browser, and type the same address...now the admin page will open....For further help please be with us.Thanks for using Fixya...
5,461 views
Usually answered in minutes!
fdfdhj
i want to put wireless security password
how to reset router to the factory settings inorder to change the preshared wep key
i would like to personalize my siemens gigaset SE568 wireless port with a password
How to open the port of UDP20,000~60,000 and UDP5060, TCP10001?
i want to know about security settings
My siemens gigaset se568 keeps resetting
I am trying to Wifi connect my HTC mobile phone (Mobile OS: windows mobile 6.1) to Siemens Gigaset SE568 WLAN dsl, but its not working.
my phone can detects and connects to Gigaset SE568 providing WEP key but no internet connection.
Gigaset SE568 WiFi works good with my laptop.
my mobile phone workds good with other WiFi access point (in my office and other places).
can someone please advice what I can do to make my HTC mobile phone work with Siemens Gigaset SE568 WLAN dsl. I guess the issue is with some device settings, it has to be configured right.
HOW CAN I MAKE MY CONNECTION SECURED?
I have a sony erricson P990i phone, i am able to connec to the modem, but not able to browse or surf on internet.
Can someone give a solution please
Hi, My siemens gigaset se568 is not allowing a software that I use to register; the IT guy says that the router has some firewall which is blocking it. How do I get the router to allow the software to register?
×