- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
refer to each cars owners manual on the procedure to follow each process may be different than the other. Make sure the allure opener has the correct presets made refer to manual.
make sure overhead door is in the closed position to begin process
DON'T BUY A NEW ONE JUST YET! IF THE BATTERIES DIED & THERMOSTA LOST POWER, IT MAY HAVE LOST IT'S MEMORY. IT MOST LIKELY WENT BACK TO FACTORY DEFAULT SETTINGS, & NEEDS TO BE RE-PROGRAMMED THROUGH THE INSTALLER SET-UP MENU. HOPEFULLY YOU HAVE THE PAPERWORK FOR THE THERMOSTAT STILL & CAN POSSIBLY DO THE SET-UP YOURSELF. IT SHOULD HAVE STEP BY STEP INSTRUCTIONS FOR THIS IN THE INSTALLATION GUIDE (NOT THE OWNERS MANUAL)
As the manual suggests, the 1st step is to RESET your pedal board. I know, you 'll have to erase 20 custom presets of yours but hey, they're already lost anyway!... So just reset the on board chip by pressing the TAP and STORE buttons together for 5 seconds while you power ON the X V-amp. That's it! Now the board sounds good as new!
/* Style Definitions */
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
font-family:"Times New Roman";
These are the working Code Entry Instructions if the Renault does NOT have the Steering wheel Remote Control Keep pressing the Preset  until the correct first digit appears on the display Keep pressing the Preset  for the correct second digit
Keep pressing the Preset  for the correct third digit
Keep pressing the Preset  for the correct fourth digit
If the correct code is now shown on screen, press and hold the Preset  for 10 seconds to save it.
Note: If Preset  does NOT enter the code , then try Preset 
To reset or set the preset station you want you need to do this
1 press tuner/band to select the band
2 Press the << down or >> up to tune to desired station
3 Press the set to stor the station
the preset number begining with one appears display
you cannot stor a total of 32 preset stations if you need more information check out the manual here ..
Check the speakers and wiring by substituting a known good speaker and check the amp inputs and RCA cables. Also make sure that the input gain and other controls are set properly. If there's still no sound, the amp itself is probably defective.