I need a new remote control for dvd player brand zenith remote No.6711R1P070H DVDplayer DVB412. Because mine is broken.

Hello, bad lens. The lens is defective that's why it is showing disc error. The lens is no longer strong enough to read the files on the disc.

Here's the LINK.

Hello Hummer,

Please follow the instuctions below to reset the password and switch off the parental control on the Zenith DBV412.

1. Switch on the TV and DVD player
2. Switch the TV to the input for the DVD player
3. Remove any disc from the player
4. Press the SETUP key on the Zenith remote to open the on-screen menu
5. Press 2 1 0 4 9 9 using the numerical keys on the Zenith remote.
6. Press SETUP again to close the menu

This will clear any password that has been set. Now you need to switch off the parental control:

8. Press the SETUP key to open the on-screen menu again
9. Use the down arrow to highlight the PADLOCK for the parental control settings
10. Press the RIGHT arrow once to enter the parental control menu
11. Highlight RATING and press the RIGHT arrow once.

You will be asked to set a password. Enter something simple and easy to remember, e.g. 0000 then press ENTER. You will need to confirm the password by entering the same number again, then press enter again.

12. Use the UP/DOWN arrows to highlight UNLOCK then press ENTER
13. Press SETUP again to close the menu

You should now be able to insert your Across the Universe disc and play it. If you are still unable to watch the disc or you are unable to switch off the parental control feature, please let me know.

Regards,
BElectric

Here is a link to our online troubleshooting there are codes and instructions here.
http://www.dishnetwork.com/downloads/pdf/user_guides_and_manuals/Remote_Codes_Web_Page.pdf

Daniel Busa
DISH Network Customer Service

Try 0000 - It's the default code for most brands unless you set a code yourself and you've forgotten it.

If not, also try 1234, 1111, 2222, 3333, 4444, etc.

Hope this helps,
BElectric

I do believe you need the remote control, there is no other way that parental controls can be accessed

i need the exact brand and model of the remote.

thanks

tom

Most remotes use the same code sets. Here's what Radio Shack says for your brand:

dvd: 0503,0539,0646,0675,0821,1268,1914

vcr:0000,0039,1137,1479

let me know how you made out.

Called Zenith.  They said: turn on the DVD player.  Hit "set-up". Scroll down to the "lock" icon.  Scroll over to "Rating". Scroll over to unlock.  Enter 0000.  Click on Ok.  Enter 0000 again, click Ok again.  Menu should read unlock.  Voila!

Here is the response from LG/Zenith customer support:

Unfortunately, this remote has very limited programmability. The manual is correct.

INSTRUCTIONS: Controlling other TVs with the remote You can control the sound level, input source, and power switch of non-LG TVs as well. If your TV is listed in the table below, set the appropriate manufacturer code.

1. While holding down TV POWER button, press the number buttons to select the manufacturer code for your TV (see the table).
2. Release TV POWER button. Code numbers of controllable TVs If more than one code number is listed, try entering them one at a time until you find the one that works with your TV.

Code numbers of controllable TVs
If more than one code number is listed, try entering them one at a time until you find the one that works with your TV.

Manufacturer Code Number
LG/GoldStar 1 (Default), 2
Zenith 1, 3, 4
Samsung 6, 7
Sony 8, 9
Hitachi 4

For further information or troubleshooting, you may contact us at 800-243-0000 for LG Customer Service assistance. An agent will be glad to assist you. Please feel free to contact us with any additional questions or concerns. Thank you again for contacting LG Electronics.