How do i set up a passworf for d link 614 wireless router

You'll need to access the administrator web page for your router, and then set a security key (password) for wireless users.

For step-by-step instructions for setting up security on the D-Link DI-614 router, see:

http://technicallyeasy.net/2010/10/how-to-secure-d-link-di-614-wireless-router/

ftp://ftp.dlink.com/Gateway/di614+/Manual/DI-614+_manual_06292005.zip Download the manual..

You will need to check the wireless settings of the router
is there any computer connected to the router ?
If yes then you can open the router set up page on that computer.
Router set up page is the page where you can check all the wireless settings of the router.

1. this error is not recognizable.
But here is the D-link site for updating your firmware for the DI-614
this may resolve your issue.
http://www.dlink.com/products/?pid=DI-614%2b
2. You also may want to check the status of you router by logging into it and checking the "status" page (192.168.0.1)
User : admin
No password unless specified
This will tell you a lot as to what the router is doing and not doing.

Right here on fixya

http://www.fixya.com/support/p277770-d_link_airplus_di_614_wireless_router/manual-14183

Go to this link
The advanced category has all the configs to the router
So read it
Thanks
Good Luck
:)
Please rate the answer if it helps u

Can you detect the wireless network name?

Go this this link:

http://portforward.com/english/routers/wireless/Dlink/DI-614+_revB/wireless.htm

You need to do some reconfiguration on your router by using the setup cd or by manually configuring it using the user interface of the router.

You need to disable the DHCP server on your "slave" wireless router ( the di-524 ). In D-link routers this might be called configuring it to be an "Access point".

When this happens, connecting to the second wireless router should cause your computer to obtain an IP address which is in the range of the first router (that is to say, it will use the first router's dhcp server).

You should be able have your laptop connect with an automatic IP address and have it work.