I need MZ-N910 software to connect my MZ-N910 to PC

It is possible that the disk was recorded on another recorder using
NetMD in SonicStage. Download SonicStage and edit/ erase your disk from within the program. Does your N910 have a USB port??

Mike

Install Sonicstage from http://forums.sonyinsider.com/index.php?
then you will be able to erase and re-record your disks

Sony Support web site has stopped support on some MD models,
however if you visit http://forums.sonyinsider.com/index.php?
you can most likely get all the support you need including drivers and SonicStage, which will work on Windows 7 & 8

You can download it from Sony's website.

manual http://www.minidisc.org/part_Sony_MZ-N910.html

This might work: http://support.sony-europe.com/dna/downloads/downloads.aspx?site=odw_en_GB&m=MZ-N910&f=pad
Just download and install.

Hope that works for you!

download and run the software from
https://www.sony.co.uk/support/en/content/cnt-dwnl/prd-dna/sony-personal-audio-driver/MZ-N910
then plug in the walkman !

If you had your headphones connected via the in-line remote control, then try connecting them directly to the player.

If this doesn't work then your player is effectively a spare parts donor: buy another one as good used ones are dirt cheap, even the top of the line and fantastic MZ-N910.

i have a n910,yes it has a mic out on it and u can record from an audio source.i used mine at the weekend to record my dj set,just make sure u get a manual with it as i'm having a few problems with record levels being too high,but it's a great bit of kit.

had the same problem a few minutes ago!
removed the battery but it didn't help.
tried with another md, no success
tried the same md in another Mz 910, no success

then it got on my nerves and I gave the MZ n910 a little shock with my hand.

It worked, stopped spinning and started to play.

It was, I think, a spinning problem, md couldn't play properly, the little shock helped.