I recently purchased a new computer with Windows 7. I can't install my Kodak EasyShare DX4330 successfully. Although I have an icon, clicking on it does nothing. Is my camera compatible with Windows 7? Is there anything I can do, download, etc., that will help me? My camera worked just fine before and I really can't afford to buy a new one right now. Help, please.

Hi Angelo
The troubleshooting guide for your model camera may assist, please click the following link --> KODAK EASYSHARE DX4330 Zoom Digital CameraUser Guide
Trust this helps, regards Alan

Hi,
Connect it to a pc and then right click on its icon.Select on formatt.

IS U R COMPUTER A WINDOWS 7? THEN JUST GO TO THE KODAK SITE AND DOWNLOAD THE SOFTWARE FOR WINDOWS 7 WILL WORK

Try to install the software on your computer first. Here are the steps:

1. Close all software applications that are open on your computer (including anti-virus software).
   
2. Place the Kodak EasyShare software CD into the CD-ROM drive.
   
3. Install the software:
   Windows OS-based computer-if the install window does not appear, choose Run from the Start menu and type d:\setup.exe where d is the drive letter that contains the CD.
   Mac OS X-double-click the CD icon on the desktop, then click the Install icon.
   
4. Follow the on-screen instructions to install the software.
   Windows OS-based computer-select Complete to automatically install the most commonly used applications. Select Custom to choose the applications you wish to install.
   Mac OS X-follow the on-screen instructions.
   NOTE: When prompted, take a few minutes to electronically register your camera and software. This lets you receive information regarding software updates and registers some of the products included with the camera. You must be connected to your Internet service provider to register electronically. To register later, see www.kodak.com/go/register.
   
5. Restart the computer. If you turned off anti-virus software, turn it back on. See the anti-virus software manual for details.
   

For information on the software applications included on the Kodak EasyShare software CD, click the Help button in the Kodak EasyShare software.

Most likely the capacitor or xenon flash bulb is bad. If you're a techhie of sorts, you might be able to fix it yourself, just make sure you discharge the capacitor when you open the camera up (in case it's still good, and charged). With the low prices on digital cameras today, it would probably be better to buy a new one than have it repaired, and keep this camera as a backup.

Here are the steps:
1. Make sure you will install a new or fully charged battery/batteries into your camera.Pls. use lithium batteries Ni-Mh or rechargeable Batteries (2000 M.Amp or higher).
2. Clean the battery contacts.
a. Remove the battery/batteries and the memory card from your camera, then wipe the battery contacts with a soft, clean cloth.
b. Reinstall the battery/batteries into your camera
3. Without the memory card,turn on your camera. '

Note KODAK no longer repairs this model. Instead they offer a Trade up option where they offer to trade the model for a newwer model 25-20% cheaper than the market price.

Contact KODAK:
http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=14563&pq-locale=en_US&_requestid=3490

You need to change the camera driver to back to windows default.
If you cannot see the camera icon under computer.
Vista
• Click Start icon
• Right-click Computer select Properties
• Select Device Manager
• Go to Driver tab and select Update Driver
• Select Browse my computer for driver software.
• Select Let me pick from a list of device drivers on my computer.
• Select Digital Still Camera
• Hit Next
XP
• Click Start icon
• Right-click My Computer select Properties
• Select Hardware
• Select Device Manager
• Go to Driver tab and select Update Driver
• Select Install from a list or specific location.
• Select Don't search I will choose the drivers to install
• Hit Next
• Select Digital Still Camera
• Hit Next
Otherwise send me a PM for free remote assistance.

You will have to download version 7.0.1
You can download it from here:
http://www.kodak.com/global/en/service/software/easyshare/en/dln_ekn026079.jhtml?operatingSystem=windows_vista&downloadLanguage=en

Close Easyshare Program > If you see an icon of easyshare at the system tray {lower right corner of the screen}
right click on it and choose Shutdown Easyshare

Right Click on the icon of Easyshare on your desktop{upper left of screen}
choose Properties, choose Open file location> Look for Catalog Folder > rename it to "old catalog" > close the whole window

Go to My Computer > C: Drive > Users > Public > Public Documents >
Look for ESBK.mb and ESBK.mbb

restart your computer
Relaunch Easyshare Program

Goodluck...

i CANT OPEN MY AIO HOME CENTER WITHOUT GETTING AN ERROR THAT SAYS ENCOUNTERED A PROBLEM, HAS TO CLOSE. ALSO, MY PICTURES ARE NOT VIBRANT COLORS.