I have an hp m9500t quad core. it runs fine for 2 to 3 hours then gives windows process error and shuts down with a bsod. i can shut it down and use it again the next day and "I am typing this message on it" it has been stress tested and all temperatures are normal. hardware passes all tests. HELP

NO PC told (model) HP = maker not model.
no OS told windows 2000 or XP or w10>?
is it windows, not told
No STOP code told of over 100+ possible.
no photo of PC
no Photo of failing screen posted.

top fails are.
bad hdd, we run the smart test,or HP DIAGnostics.
bad batteries all are suspect we test them.

all I have are questions, key
and all I can do is beg. endlessly.

we can not magically guess what PC you own. ever.

Sounds like a drivers issue. www.driveragent.com is a reliable scanner and source of real drivers. There is a small cost involved.

Have a read of this: http://www.tomshardware.com/forum/392938-33-0xa0000001-bsod-code-caused-atikmdag-sapphire-7970

and this:

http://www.tomshardware.com/answers/id-1690717/bsod-0xa0000001-error.html#.


If this laptop is still under warrantee, I'd get it replaced. You could spend hours/days tracking down the cause of this. You could spend hours/days updating faulty drivers, running diagnostic tests such as Memtest, HDTune. You may even fix it - however what's to say the problem doesn't re-occur somewhere later in life.

That's why we have warrantees. I'd use it if you can.

H

Download Spybot S&D and run it you have a virus

First - re-seat the hard disk and reboot the computer. If the computer does not boot up then reboot and go into the BIOS configuration to see if the BIOS detects the hard drive. If it doesn't detect the hard drive then it could be faulty.
Then the hard drive needs to be replaced in the computer/laptop, Windows installed and the computer or laptop's device drivers plus your programs etc. to get a functioning computer/laptop again.

Stop: 0x0000007B error code refers to memory issues
You need make some changes in your computer before installing XP
1. On start up, press F2 to enter BIOS 2. Expand the "Drives" section 3. Go to "SATA Operation" 4. Change this from "RAID Auto/AHCI" to "RAID Auto/ATA"
You will be able to install XP now

HiNext time you boot up your laptop do the following: Just after the bios screen just before it begins to boot into windows press and hold the F8 key you should get the Windows Advanced Options Menu.
Look for the option disable automatic restart on system failure and select it using up and down arrow keys. Press enter when you have selected it. Then when you get a BSOD the laptop will not restart giving you a chance to look for the error code. Give the error code to me.

if it shuts down alot, its probably overheating due to cpu or graphics cards overheating.

check that coolers are not loose of clogged with dust, or even still running

so you need to reset cmos as memory modules must be out. is a virus instaled on mainboard so only way to recover control is these steps:
1st take the hd out.
2nd reset cmos
3rd take memory out
then put windows install cd and install as 1st time on computer, dont attemph to loading windows, or else you need to repeat-it again. then install laptop drivers, then test.

Backup all your files to an external disk-drive, or to writable DVD-recordable disks. Reinstall Windows, and restore your files from your backup.