When I put in my Action Replay DS and turn on my Nintendo DS Lite, the starting screen for the DS shows up, and then it just goes white instead of going to the AR menu. I tried pressing A+B and then Start+Select, but that never worked. I tried using my other DS lite, and that didn't work either. I really don't want to spend money, is there any other way?

Hello there.You can go to www.mubuy.com to buy a new one.I bought one last week.

hold a and b then turn on action replay when it says this product is not licenced or endorsed by nintendo hold select and start it resests action replay but you can enter codes again. the screen will stay white for a few seconds but that will go away

yeah i know happened to me just try to clean the ds slot

Action Replays are not very reliable, they also have no nintendo license. try charging your DS to a full. then put the AR cartrage into the console. use the datalink cable that came with the product to sync data to the AR console from the computer.
before pluging in the ds, you want to install the included disket. (small CD) to the computer you want to work with.
it may be that the AR is defective, or somehow the software was dameged.
also, if you are planning to get one, the AR does not function with the Nintendo DSi

if its one of the micro sd card action replay you can try to format it.make sure you get all of the data off for this take it back to the first time you got it from the store.

buy a new action replay

your action replay is busted you'd be better off getting a new one or somehow fixing it.

use less codes

Everybody has the same problem!! ITS UR ACTOIN REPLAY!!RETURN IT!!!!!!!!!!!!!!!!!!!!!!

you have the wrong answer action replay back to its factory settings ( the way you bought it )

First reset your Action Replay by Holding the A+B+SELECT+START buttons when you start up the Action Replay (and pass the Warning Screen for the DS), the white screen will remain there for a while longer than normal

When the menu screen shows up, let go of the buttons

Now connect your DS to your computer, you should now be able to add codes to your DS