Display on the panasonic kx-t7436

In a TD system, keep pressing the * button on an idle phone until what you want appears. There are 3 steps.

look up Call log if you have a manual. Or try this software
http://www.aggsoft.com/pbx/panasonic-kx-t7436-call-logging.htm

while talking to someone:

1) press "CONF"
2) dial the extension number (or 9+the phone number) you want to conference in
3) wait for the person to answer
4) press "CONF" again

Press PROGRAM 99 the button (it must be a CO button with lights) and dial 1 + the extension and STORE.

Carl

It requires 3 things to display CID on a Panasonic system phone, CID service, CID hardware (part number TD-193), and programming. The 193 card is a 4-port card about 3 inches square and it attaches to the trunk card of a TD system.

It was an extra cost item in everything but the -7 cabinet, the last one Panasonic made in the series.

Carl

A 7436 phone works on TD and TDA series systems only. TD's are white, TDA's are blue/black. This thread will work, you need to find the Operator or Manager's station to make the changes. If you don't have access to *# then try **. If you get 3 beeps, you don't have the right phone.

http://www.fixya.com/support/t3304260-change_time_daylight_saving

Carl

Press the star button

Here is a link to the manual at Panasonic. Click on the "download" link under "operating instructions."

http://www2.panasonic.com/consumer-electronics/support/Phones-Fax/Business-Home-Systems/System-Phones/Digital-Super-Hybrid-Phones/model.KX-T7436

Someone has to answer the Message Waiting call to cancel...or, try dialing 700 plus your extension to cancel ALL MW lights.

Carl

Hi Juliana, to set the time and date you leave the handset on-hook, Press program * * and the user password ( default 1 2 3 4 ), display shows USR - PGM NO?, dial 0 0 0, press next, enter 2 digit year ( to change current entry press clear ), press arrow pointing to the right, press select until month is displayed, enter month, press right arrow, enter day, press right arrow, press select until day of week is displayed, press store, press next, enter hour, press arrow, enter minutes, press arrow, press select for am or pm, press arrow, press select for 12 or 24 hour format, press store, press end. Let me know how it goes. ...Mike