At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Try the programation with the central control of de wall
hold light boton then press de open botton (dont un unpress the light botton. Then put the control about 2 inch of the main control until its open or close the garage door.
Check your door sensors. Make sure they are pointed at one another and the small light on each one is lit and not flickering. Tweak them a little. If you cannot get both lights to come on you have a bad sensor.
If that keypad quit after working since 1997 and a new battery didn't get it going it has just gone bad. The model number listed for your opener is now 53876.
If you follow the watch the video and follow the instructions on this site and still cannot get your opener to program then you have a bad logic board.
steve it sounds like the two eyes are not lined up to communicate with one another and complete the circuit so the door will work. This is a safety feature. Begin by seeing if adjusting the eyes will line them up and tuen on both green lights. Also be sure the wire to each light is still connected.
×