Check the video card, double check ram.
Start with only to Gbs Corsair RAM, see if the system goes, if it works then problem is with RAM, If you get problems even with one RAM module check viodeo adapter , test with a replacement adapter and see if you keep getting troubles.
Some trouble to video adapter may be fixed with a driver update.
×
http://ati-catalyst-drivers.en.softonic.com/ Optimise your ATi graphics card's performance. ... and save profiles for Direct3D and OpenGL applications ... hope this helps
94 views
Usually answered in minutes!
Report abuse
I have the Asus M3a32-MVP WiFi deluxe mother board with the AM2 CPU chip. i have 2 Xfx 9800 GTX Sli ready cards for graphics and a Fatality sound card made by creative. I'm running the suggested corsair memory which is 4G 2 2. Every time I try to start the system up I get the warning beeps and in 15 sec it turns off. I tried another memory type and it stayed on but no picture. the memory i tried to run first is from the Dominator series.
1 short beep then a pause of 10 seconds then 4 short beeps then pause for 15 seconds then shuts off.
I am using Corsair Dominator 4GB (2x2 GB) 240-pin DDR2 SDRAM DDR2 1066 PC2(8500) TWIN2x4096-8500 C5DF Memory
×