Cant pair up cell phone to bluetooth

there are many ways like!
if your computer has Bluetooth or a Bluetooth dongle then u can transfer over Bluetooth!
if u have a card reader then you can put your card with your pictures in it and then copy to the pc!
if u have the cord(USB cable) then u can directly connect your phone to the computer in mass storage mode and then the pc will show the phone in my computer where u can copy and paste the pictures to the pc!!
rate and reply for more support!!

Is this a repair store,some stores have a tec that can reload the firmware and any new updates for the phone. The warranty is probably over and moto would charge you to repair the phone. See how far away that there is a Verizon that can reload the firmware.

Also,thanks to verizon for being thieves that you can not transfer
anything with bluetooth, so if you want bluetooth for your pc, or to transfer anything your out of luck. verizon has disabled
Obex in the firmware of the phone. You can bluetooth a headset,but thats all.

1. Press Start.
2. Scroll to and Select Bluetooth.
3. Scroll to and Select Bluetooth Manager.
4. Scroll to and Select Hands-free.
5. Press Add to configure a new Hands-free device.
6. Press Search to search for devices. Your phone will begin to search for the device (consult your device user guide for instructions on placing your device in pairing mode).
7. Select the device.
8. When prompted, press Yes to pair with the device.
9. Enter the device passkey (normally 0000).
10. Press Done. When your phone is paired, the Bluetooth indicator will be displayed on the home screen.

Just checking to see if this is the way you connect,or tried to connect.

it is just because u have either turned off ur visibility to others so thats why u cant find them ...or the second cause can be that remove all the paired blutooth devices from ur phone ,,,may be it then start working ,,, thx

first of all set both devices with "no password requested" make yr phone "visible for everyone" in yr settings, set a name for yr phone(usually is the phone model number), switch the bluetooth "on" on both devices, now you should see that the phone ask u if u want to be connected to the other device ( the name will be shown before u accept the connection) say "yes" that´s all!

try to check the setting of your blutoot, check te find me option.

unpair the device then delete it, then pair it again

when you activate the Jabra put your mobile to search for the bluetooth device when it finds it then pair code is 0000....then it should be paired

Your not doing anything wrong it usually means that the headset isn't capable with ur razr or you need to reset both of them and try it again. Hope this helps =)

When I try to add device it shows another person name. Then it says the status is disconnected.

Step 1 - Enable Bluetooth functionality on the Motorola V3m. Note: The Bluetooth power must be set to ON position to pair the device. From the main screen, press Menu [Center NavKey]. Scroll to Settings & Tools. Scroll to Connections, press [Center NavKey]. Scroll to Bluetooth, press [Center NavKey]. Scroll to Setup, press [Center NavKey]. Scroll to Power XXX, press [Center NavKey]. Scroll to On or OFF, press [Center NavKey]. Step 2 - Put your fully charged Bluetooth headset into pairing mode. Start with your Bluetooth accessory powered off. Hold down the power/end key for 5 seconds. You'll hear a short beep and the LED light turns red. Your Bluetooth accessory is now in pairing mode and ready to be paired with your handset. Step 3 - Pair the Motorola V3m with a Bluetooth Accessory. From the main screen, press Menu [Center NavKey]. Scroll to Settings & Tools. Scroll to Connections, press [Center NavKey]. Scroll to Bluetooth, press [Center NavKey]. Scroll to Handsfree, press [Center NavKey]. Place accessory in pairing mode. See accessory pairing instructions. Scroll to Look For Devices, press [Center NavKey]. Phone displays Scanning. Scroll to XXXAccessory NameXXX, press [Center NavKey]. Phone displays Bond With XXXAccessory NameXXX. Press Yes [Right SoftKey]. Phone displays Enter Passkey. Enter 0000, press [Center NavKey]. (See accessory instructions as passcode may vary.) Phone displays Connected.