I need to instalated but i don`t have the C D

If you don,t no how to install, Get some body that does, That you don,t fry it,

Hello,

You probably don't need to replace the hard drive. It may very well have enough space to install Windows 7. You can likely install Windows 7 on the old PC, but depending on how much ram the machine has it may not be such a great experience in the end.......seriously. If you can get 1 gig or more of ram in it, then it may be feasable to install win7, but don't expect much in the way of performance. I don't mean to sound negative though....if you're so inclined, then go for it! It is probably do-able.

Joe

Audio Driver you can download hereChipset driver hereLAN Driver here

hello, u can download the installer by click this site (offline installer , 15MB ): http://xh.yimg.com/gj/msgr/11/client/ymsgr1100_2009_us.exe
this will automatically download the installer, so u will have the master program. after u finishing download, double click the installer then follow the step installation.
if u don't need the master program, u can download from here (online installer, 900KB): http://messenger.yahoo.com/download/
click download button from this page, save the installer ( this small installer because when u click the installer it need to connect the internet to download the master to your computer)
my suggestion is use the offline installer, even it big this make u have the master, so when u need to install again u don't need to connect the internet to download the master again (this is if u use the online installer).
hope this useful, regards.

Click here
Click on above link select os and download driver and install.
Let me know if you need further assistance.
Thanks for using FixYa

I'd suggest to upgrading your BIOS first, because this model had too many problems with BIOS..
Get it here.

The only way to get access to certain functions is to install bootcamp from the Apple CD before installing Windows. If you don't have the CDs and you want the functionality, you'll need to purchase the proper CDs.

Hi, there!
I don't know what software you want to install back to your computer. Just let me know more details then I may help you out.
If you have the software disk then just put it in your computer and follow the instruction.
If you don't have the disk, you can download it from internet, select Save button and Click Run after download.
There is a website and I don't know you need it or not but here it is: http://ninite.com/ . Just select what software you need and click get installer.
Hope this will help. Thanks for reading.

1st You download Webcam Driver.
I need to install chicony 2110 driver but I don`t
After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.

Goto canons website they will have a downloads section for the drivers & Software