How do I switch off the audio on the Panasonic NV-GS250 so I can record video footage with no sound.

http://johnsondrivers.com/download-driver/PANASONIC/NVGS250

Hi, please get it here : www.userdrivers.com > Camcorder
www.nodevice.com/driver/company/Panasonic/page10.html

Regards

Did you solve this? Also, could you be more specific? No video on either the LCD or in the viewfinder? Both when trying to record and when playing back a tape?

http://service.us.panasonic.com/OPERMANPDF/PVGS250.PDF

pls see this manual and confirm it helped u or not

pls rate me FIXYA for help

Make sure you have no programs running in the background when your rendering. Make sure your hard drive is defragged. That makes a big difference.

Just check your setting and make your camera in default setting try to use the recommended tapes only

Panasonic NV-GS27 in this model you cannot transfer the motion pictures through USB. For transfering u have to use the DV port of the camera.

Hi, I recently had he same problem, you need to have the unit repaired, it is a small but extremely expensive part that has broken. If my recollection serves me right, it's the colour sensor. There are three that combine the colours to give natural colour. My repairer stated that vibration caused the problems to my camera. Good luck.

no spare screws, ever! look for a small pinhole through which to push a pin to reset the device with batteries in.

To get your footage into the computer from DV tape you need a four pin firewire (IEEE1493 or iLink) cable from the camera to a six pin cable into the computer. USB will not do a proper job, it's for downloding photos or as you already mentioned, Web caming.