At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: Can any body tell me what size the front drum bearing...
You can buy a drum bearing kit on the net or from Espares.co.uk depending where you are..Some kits are sold as a Half drum with prefitted units quite Expensive......
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Looks you have aleakage of grease form a damaged bearing in the drum.
If you have the technical preparation, you should remove the drum and check those bearing. See some interesting youtube videos about issue: How to remove washing machine Drum tub 1 of 4
It sounds like the rotating program controller has failed. It is telling other parts of the machine to do things as part of the wash cycle and the signal is not reaching them. This is an expensive part to replace. Get it fixed under guarantee if its new. If its old replace it, but do not buy a Hoover, they are very cheaply made and fail a lot. If you want a cheap one buy a Zanussi.
sometimes small objects like coins and buttons that came off our cloths makes the noise.See if something would fall if you turn it upside down,that is the simplest thing to do without using a tool.Good luck
The Buttons on the Hoover Softwave are as follows from left to right:
1. ?
2. Half load
3. Wool
4. Low Heat
5. Power
I can not find what the first button is I have looked every where I can think of to find out what the first button is. YouTube has many pictures of the front but you can not make out the first button of the group. Sorry I can not be of more assistance.
After syphoning water out of drum, remove and clean filter located at bottom front left of washer, if there is a screw in the filter cover, unscrew this first.
Remove filter by unscrewing anti-clockwise.
Door will not open if it has water in it.
Lay hose down to get rid of water, then you can open door.
Try the spin with no water in, if it spins, then you have a draining problem
I have a performa 1100. No 4 is the 40 degree is the normal cottons cycle which is the one I use. Tip- only fill the drum 3/4 full otherwise it struggles to drain and spin- I know!
×