Navman my65t Makes connection OK but no sound coming through navman. Once connection is made cannot hear or speak to person on the phone. Using iPhone 3GS and is paired with Navman. Tried it inside (out of car) last night and it worked sometimes but cannot get it to work at all when in cradle.

Unplug Navman USB before reinstalling Navman software.

Try this WEB site.
http://www.navman.com.au/car-gps-devices/previous-products//MY65T/Overview/

Hi!

Here is the link where you can download your instruction manual:

http://www.navman.com.au/car-GPS-devices/MY-Series/MY65T/Overview/

The user guide link is in the nav bar below "MY search is finally over" on the right hand side.
Be patient. It's a LARGE file of over 8 meg.

Hope this helps.

I've got MY65T working on an iPhone 3GS. I previously had the problem where it would pair and retrieve phone book, but not transmit or receive voice from my iPhone when making a call.

The last thing I did that fixed it was to remove the bluetooth pairings and "reinstall software on your navman". I don't know if this may remove some of your settings / POI / etc. This was a new purchase so I didn't have anything to lose.

Before doing this I had upgraded the navdesk software to 7.30, and installed the latest firmware for MY65T. Firmware is located at http://www.navmansupport.com.au/Software/My%20Series/MY65T/MY250___352.htm

Details:
-remove the phone bluetooth pairing from the Navman from Settings / Bluetooth / My Paired Devices / [your phone] / delete
-remove the bluetooth pairing from your phone's settings
-connect navman to PC and launch navdesk
-click "My Navman" / "Reinstall software on your Navman"
-download the install file if prompted
-accept the reinstallation prompts and complete reinstallation
-set your phone to discoverable over bluetooth (just keep it on the Bluetooth settings screen on iPhone)
-go to Settings / Bluetooth /" Search new devices" on your Navman
-click your phone's name on the navman's discovered devices
-enter the PIN onto your phone when prompted and accept the pairing. This takes a little while.
-test handsfree!

Same problem on the MY65 with a Motorolla Razor V3.
Choose Sync Addressbook and the Mortorolla comes back straight away "xxxxx disconnected"
Doesn't sound like the phones ??

try using the default 0000

Please rate my help++++Thanks for using FIXYA

phone lock code

The N95 is a fairly new phone and the S50 was only launched on the market in 2007. That phone is not listed as being compatible on the Navman website. Try and see if there are any updates via Nokia. Otherwise the 2 are just not compatible and there is no solution. Each company can alter the bluetooth settings, some companies use a standard connections and others a more complex connection.

I have been able to pair the navman with nokia, samsung, and sharp phones, but I haven't been able to pair the ZTE 252 with the navman. Personally I think this is due to it being a cheaply manufactured phone.