AIWA A2118 model.the channel got reprogrammed,i repragram the channel successfully but theres no sound.i have adjust the volume and see the volume menu but still no sound.it is not in mute.what do I need to do?

This problem has been answerd a few while ago.

Aiwa television comes with the option of blocking certain channels from viewing, allowing you to control which channels people using the television can view. However, if you forget the code that you entered to block the channels, you might find yourself unable to watch those channels. Fortunately, there are a couple of buttons on the television and the remote that you can press to reset the PIN and customer ID numbers, which unblocks the channels.

Turn the television on.

Press the "Volume Down" button on the front of the TV and press the "7" button on the remote at the same time.

Enter in a new PIN code and new customer ID.

You just come aroung the sound decoder section of your tv. Decoder problems may cause the fult you pointed out. Since all the controls are electronically controlled, and all are through sound decoder, which converts sound to stereo the problem must be there. Since sound comes from two channels are ok, there is no problem around sound output. Check for some soldering loose contact, wire socket loose cotanct also.

Cleared all AV settings and reprogrammed.

On most TV's with speaker control there's a way to disable the TV's volume control effect on the level fed out to an external amplifier. Find it and disable it it or select FIXED for its level, or, while listening through the Aiwa, raise the TV's volume through its own remote and see if that affects what the Aiwa gets for volume.

Or, enable the TV's speakers but find the same interna lAudio setting and make it Fixed, but turn the TV volume down if you don't want to hear its speakers. That way, you could actually listen to the TV on its own speakers if you want, say, for casual watching of the Weather Channel or news, for example.

I have Aiwa TV MODEL No. TV-A149
The problem that I am suddenly facing is that I can't change channels or volume or use any other function. I can't even turn it off with remote control.

Its stuck randomly on a particular channel that I was watching at that point of time.

Along with that channel it now shows a message in flashing red color that reads :-
AGING
6EDEH

Now when I press ''Display'' button on remote control volume goes off and this code is shown :-
S123 K234 Y
100 000 0


The numbers in the second line can be navigated by ''CH+'' button and changed between 0 and 1 by ''Vol+'' button.

I really don't know anything about this. So, please help me out of this problem.

Set the volume to a minimum, and simultaneously press the VOL-key 9 in the C / R. With the buttons 1-7 (or 1-8 in
some models) will select the different modes (sub-menu) to adjust. With VOL + / - values are adjusted. Press 8 (or 0 in some models) for
exit and save.

i can solve ur prob by your self but u have to pay for that.

are they IR and UHF remotes

well reprogram your tv. i beleive there is an access infront of the tv. if not with your remote control.