I forgot the password to the first connection of the modem router belkin. How can I recover

Any router that you cannot remember the password to your only choice is to reset the router to factory default and reconfigure it.
To reset a Belkin router:

Press and hold the Reset button for 15 seconds. The router automatically reboots when it resets. Wait approximately one minute until the router restarts, and then navigate to "192.168.2.1" using any Web browser. Leave the Password field blank and click "Submit" to connect to the Web-based interface

If you can log into the router you should be able to simply reset the guest PSK to whatever you like. If you have a computer that can successfully connect to the guest network you can open an elevated command prompt on it and type netsh wlan export profile name="ProfileName" folder="C:\" key=clear Replace ProfileName with the SSID for the network.

Dear A,

Please go to the Manual Library link provided directing you to the Access page NetComm 3G9W User Manual Access Control Services . Take note to the drop down menu and the steps to follow. On page (40) is the password help NetComm 3G9W User Manual Ip Addresses Passwords . Follow to the site NetComm Wireless to accomplish the changes.

Fare. Well.

It is not likely you will be able to recover the password if the individual who implemented it is unavailable to provide it. Your only alternative is to factory reset the device according to the manual and then put in the necessary settings required. The default username and password for this device is easily found in the users manual for the device, found here:

http://www.belkin.com/support/article/?lid=en&pid=f5d8236-4&aid=14394&scid=942

Setup steps:

1. Locate the reset hole on the router. The button will be on the back or side of the router.
   See images below:

1. Leave the router powered on.
2. Use a paperclip (or similar) to press and hold in the reset button for 10 seconds.
3. Remove the paperclip.
4. Wait approximately one minute for the router to restart.

The settings for the router have now been reset back to their default.

If you need more help come back.Post / thumbs / testimonial are welcome!

connect your router to computer with ethernet cable.
Then you can access it with following link.
for belkin routers http://192.168.15.1
for other routers
http://192.168.1.1
or
http://192.168.0.1


type user as "admin" and password as "admin" or blank or "password"
Then you can see configuration page of router.Click on wireless and If you want secure router then enable WEP security then add new code it is your password key for connect wi fi.
If you are not able to access your router with above link then RESEt it you can find RESET button in back panel of router press it for 10 seconds.Then all settings are defaults.
Let me know if you need further assistance.

I had this with Bt Internet and this exact same router, you have to phone Belkin up and they give you a complete set of new settings that you manually have to put in during setup. If i remember rightly its a free phone number and the operator who answered spoke semi-english so not all bad, hope this helps.

Chris E