I cant log on the router limited or no connectivity

If you have a wireless connection to the wireless router is it assigning IP addresses. How many devices do you have connected already? Maybe you have reached a limit and need to assign more IP's. Is your wireless router secure?(use of password) Check and see how many devices are connected to it. You do this from your desktop as long as it is connected to the wireless router via cable. Open web browser type 192.168.1.1 in address bar. Takes you to router login page for your router. Unless you have changed it the username is: ADMIN and the password is: PASSWORD. Once you are logged into the router this is where you can check the settings and see how many devices are connected. You can also add a password here to log onto your network so that no one unauthorized can use it. beyond this it gets pretty in depth. Just remember your wireless router controls your wireless network not the devices connecting to it. there may be a FAQ or help tab associated w your routers login page.

I’m happy to help further over the phone at https://www.6ya.com/expert/louis_03c793f49b118a83

you are getting the message limited or no connectivity , that means your computer is not getting IP address from the router. First check the physical connections to the router . Make sure that your computer is connected to the router on port 1, 2, 3, 4 and NOT on Internet port.
If the connections are correct and you still get the same error then reset the router for 30 seconds. Unplug the power to the router and plug it back in. wait for 1 minute and reconfigure the router.
First make sure that the computer is able to go on line directly through the modem.

Click here for more information about the router and networks

You said that when you connect the computer to the modem, you get limited or no connectivity. make sure that your computer will be able to go online when you connect it the modem directly.
If your computer is able to go online through the modem
Then you need to connect the computer to the router ad the modem to the router.
open the set up page of the router and change the settings of the router according to the ISP.
Click Here for step by step by instructions

Are you trying to install the router.
You can do it manually without the CD.
Make sure that your computer is able to go online through the modem.
If your computer is able to go online through the modem
Then you need to connect the computer to the router ad the modem to the router.
open the set up page of the router and change the settings of the router according to the ISP.
Click Here for step by step by instructions

It is your ISP problem. I was having the problem over the summer with verizon, and they had to replace 150 of cable and finally got it fix.

If you are using NAT then have the router only assign a limited number of IP addresses. If you are not using NAT then doing so can help to limit the number of users. keep in mind though that the router is slower than the PC when refreshing IP connections. So if a PC loses it's connection you may not be able to log back in for several minutes to several hours.

Check to see if you have the latest firmware version installed on your router.

Cradlepoint Firmware

Upgrade if it isn't, report back after trying to connect again.

You have to turned on DHCP in your router settings. i think its under the General TAB if its a linksys router

Please you write more detail to problem.

Thank you.

Try dong a TCP/IP stack repair Start -> Run -> Type CMD to open a command prompt. To reset the Winsock type this into the commnad prompt: netsh winsock reset catalog Next To reset TCP/IP type this into the command prompt: netsh int ip reset reset.log Then reboot your pc and see if that helps. If not let me know.