Westinghouse 26 ..... TV will turn on and stay on for about 5 minutes and then screen goes black.... used to be able to turn it off and then it would come back on and stay on.. now it doesnt

Samsung HL-R5087W TV screen goes blank -tv/sound on - Forums ...

www.cnet.com > Forums > Samsung

CNETJun 11, 2015 - About a month ago, the at various times the tv screen would go blankeven though the tv ... Try turning off the cable/sat box when the happens. ... In reply to: Samsung SP50L7HX DLP TV linked to Sky HD box - same problem .... on it comesback to normal. however, once it went off again (Black Screen) after only 2-3 minutes. ln-t4069f picture problem lcd warmup - Forums - CNET
Jun 11, 2015
Samsung LCD TV LN-T5265F Black Screen Diagnosis Help ...
Jun 11, 2015
More results from www.cnet.com

TV with Black Blank Screen Repair How to Troubleshoot ...

? 3:16
https://www.youtube.com/watch?v=kFdVi2ejfzA
May 8, 2014 - Uploaded by ShopJimmy.com
TV Repair Help for a TV With a Black No Image on the Screen ...Sign in to add this video to a playlist. ... LCD & LED TV Repair - No Image & Blank Black Screen Flashlight ... Easiest TV repair - How to Fix Power [TV turns off, freezes, or won't ... 1:26.Samsung LED TV Blank Screen & No Backlights Basic ...

Samsung TV screen goes black w/ audio still playing ...

? 1:49
https://www.youtube.com/watch?v=L9cjcsysdW4
Sep 11, 2012 - Uploaded by Roberto Ramos
TV screen begins to flicker then screen turns black while the audio continues to heard. I'm unable to see the TV Menu options when screen turns off. ... After turning the TV OFF then back ON again, the screen will flicker and then ... 1:26. Samsung LEDTV Repair - T-Con Board Replacement - No Picture on ...

check to see if the sleep timer is engaged

You cannot fix your tv by yourself take it to the repairman. the power supply is defected.

This unit should still be under warranty and should be taken in for warranty service. Any attempt to access the interior will void the warranty. It is important that a complete description of the problem like you entered here be taken along when you bring the set in for service. This will insure that the servicer be able to reproduce the problem and resolve it.

From your description (and as a servicer), I would be looking for a component that is heat sensitive. These types of problems are fairly easy to locate and resolve.

Please take this in for warranty service and update this when you find out the details.

Thanks,
Dan

This is known as SLEEP MODE problem.

Simple solutions:
1. Get a power surge protector / strip.
2. Plug your TV power cord to the power surge.
3.Then turn-on your TV using the remote control. Just in case it won't go all the way to normal state.
4. Turn-off the switch of your power surge like 5 times with an interval of 3-5 seconds.
5. Then repeat step 3 and 4.
6. These step is done to over-ride the sleep mode.

Roan

Hello, two things, one if the unit gets stuck there meaning that the W stays there and it shows that on the screen thank your main board is stuck on the boot mode and you will need to replace. The second is if the W goes away than you need to see if you can plug something in and change the input mode (even if you can't see anything on the screen) so that you can see if there is any sound coming in to the unit. If this is the case than you are looking at dead inverter board. If you would like to further troubleshoot than please email me at [email protected] for further assistance. If this information was useful please rate me on this webpage.

There are two places to look for the problems, the backlight inverter board and the power supply. Look at the power supply first since it is easier to get to, look for burnt parts, bad capacitors, etc.
http://en.wikipedia.org/wiki/Capacitor_plague
Please post back what you find.

The video processor is having some issues. This is not likely an LCD Panel problem.

Since it is after 5 minutes it is probably cold solder. My guess is the video processor will be a fairly large IC with a big Heat Sink on top (or some other cooling method)

Have you tried unplugging overnight? Sometimes mine gets screen garbage and that clears it up. Of course, now it says "Auto Scan Required" every time I power up. Maybe I should've grabbed that after Xmas 32" at Fry's for $400.

ICheck the power supply connections make shure tht the plugs are seated correctly. The power supply isreplaceable as a complete uitand you have to return a repairable unit.
loumargo
Allied electronics
[email protected]