Question about Apex Digital GB5108 51" Rear Projection EDTV-Ready Television

On my apex 40 inch model number gb5108 screen i notice during commercials that have a white screen in the background that a black line starts at the top and moves downward. i am wondering if there is any adjustment that i can do to fix this problem or if there is something else wrong, ex: maybe a filament??? any assistance is appreciated..

5 Related Answers

Anonymous

1 Answer

I had the same problem with mine, it turned out to be a fried audio board. I simply used the audio outputs on the back of the tv to drive a new reciever with surround. Sound a heck of a lot better than the speakers built into the tv.

Posted on Sep 11, 2008

ladywinn

5138 Answers

SOURCE: my apex gb5108 tv will

Pull power supply board look for bad capacitors.Poor solder connections.

Posted on Dec 18, 2008

Anonymous

73 Answers

SOURCE: wavy picture vertically

if you have the speakers on top of the television or a phone near it might becaused by this

Posted on Apr 09, 2009

Anonymous

6 Answers

SOURCE: My apex gb5108 convergence lines wont line up.I'm watching 3d

possibly the convergance ics have failed or convergance module
soldercon or both not a very costly repair

Posted on Oct 04, 2009

Anonymous

1 Answer

SOURCE: how do I adjust or repair convergence on my 52

No picture when power is turned on

Posted on Dec 19, 2009

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

Picture is too dark and will not adjust brighter

reguletor supply input resistence hi valu

Read full answer

Jan 09, 2013 • Apex Digital GB5108 51" Rear Projection...

0helpful

1answer

Pink horizontal lines on samsung plasma tc when white background

I have this same tv and have the same problem, anytime there is a white background there is this pinkinsh tint in the middle of the screen, easily seen during those Apple commercials.

Read full answer

Aug 13, 2012 • Samsung 3D Plasma TV PN58C8000YFXZA...

0helpful

1answer

I have a black line acrossthe center of my apex gb5108 tv. does anyone know if it is worth fixing?

hi
it should be changed just
if any body want to repair, it may be to expand the problem

Read full answer

Jun 02, 2010 • Apex Digital GB5108 51" Rear Projection...

1helpful

1answer

How do I adjust or repair convergence on my 52 inch Apex rear projection tv GB5108

No picture when power is turned on

Read full answer

Dec 04, 2009 • Apex Digital GB5108 51" Rear Projection...

0helpful

1answer

My apex gb5108 convergence lines wont line up.I'm watching 3d

possibly the convergance ics have failed or convergance module
soldercon or both not a very costly repair

Read full answer

Aug 25, 2009 • Apex Digital GB5108 51" Rear Projection...

0helpful

1answer

Convergence out of line

STKs must not have held up Look in back of set they are 2 Big Black ICs will have part number on them example STK392-110,if 110s use 150s.you can order parts from MATs 1-800-628-1118.

Read full answer

Aug 20, 2009 • Apex Digital GB5108 51" Rear Projection...

0helpful

1answer

Apex gb5108

'I to am getting only wavy blue lines, no sound, doesn't even show channel indicators. TV was off for 4 days, came home turned it on and ten minutes later this screen appeared, it wont even show the menu screen, different channels or video inputs no sound either.

Read full answer

Jun 21, 2008 • Apex Digital GB5108 51" Rear Projection...

0helpful

1answer

51 big screen apex tv, convergence or verticle IC?

If the lines are thin and close together running horizontally, it may be the vertical driver, but that usually takes out the resistor and sometimes the diode in the B+ for the vert. Also you must replace the caps that caused the problem in the first place.

Read full answer

Feb 05, 2008 • Apex Digital GB5108 51" Rear Projection...

0helpful

1answer

Apex gb5108

Your Convergence is off. Go through the menue to the CONVERGENCE and follow the on screen instructions.

Start with the RED gun and align each cross point starting with the upper left corner.

You will be pulling the red to match the green.

If the television shuts down during this process, it will reset the convergence and you can try again.

After you get the red gun perfectly aligned with the green, start with the blue.

follow the on screen directs and don't forget to store.

Use the remote for these adjustments.

I hope that this helps..

Read full answer

Jan 06, 2008 • Apex Digital GB5108 51" Rear Projection...

0helpful

2answers