Question about Comfort Zone CZ9009 Oil Filled Electric Utility Heater

1 Answer

How do you program this heater - Comfort Zone CZ9009 Oil Filled Electric Utility Heater

Posted by dennick_jane on

Ad

1 Answer

richard sanders

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

Temp setting
1. press the temp/timer button untill the temp icon blinks
2 use up and down arrows to set temp.3 the temperture icon will stop blinking and the current room temperture will appear after desired temp. is set.
4 the heat will turn off shortly after the desiredtemp. is reached and the temp. ndisplay will blink.
5 the heater will turn back on when room temperture drops below the set temp.

timer : auto -off press the temp/time button untill timer icon blinks. the hour display will apear. the auto off icon will also appear.

2. use up and down arrow buttons to set the heater operation time between 1 and 10 hours. this function will activate once the timer icon stops blinking.
3. the heater will automaticly turn off when time runs out.

set temperture first so heater will cycle on and off till shut down time reached

Posted on Dec 07, 2011

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error code f51 flashing. What's wrong?


David: Try downloading this free user manual: http://laundry.manualsonline.com/manuals/mfg/miele/pw_6065.htmlk According to ApplianceHelponline.: " Heater pressure switch The program is interrupted and the drain pump is operated. The display shows Technical fault F51. Call Service Department. The buzzer is activated for 2 minutes.

Background information:

Start position: One second after the program start, heater relay K1/1 is activated. This enables a check as to whether the contacts on heater pressure switch B1/13 have closed on switching steps 21/22 or 11/12.

Cause:
Heater relay defective; contact open.

Remedy:
Replace the heater relay.

Cause:
Heater relay solenoid defective.

Remedy:
Replace the heater relay.

Cause:
Connection from heater relay to electronic module open-circuited.

Remedy:

1. Check plug connections.

2. Check the connection wires for continuity.

Cause:
Heater pressure switch open- or short-circuited.

Remedy:
Replace the heater pressure switch.

Cause:
Connection from heater pressure switch to electronic open-circuited.

Remedy:

1. Check plug connections.

2. Check the connection wires for continuity.

Cause:
Foreign objects in heater pressure switch.

Remedy:
Replace the heater pressure switch."

May 14, 2015 | Miele Washing Machines

1 Answer

What is Technical Fault 51? It appeared a few moments ago on our machine, but when I switched it off and reset the machine it worked as normal again.


F51 Heater pressure switch The program is interrupted and the drain pump is operated. The display shows Technical fault F51. Call Service Department. The buzzer is activated for 2 minutes.

Background information:

Start position: One second after the program start, heater relay K1/1 is activated. This enables a check as to whether the contacts on heater pressure switch B1/13 have closed on switching steps 21/22 or 11/12.

Cause:
Heater relay defective; contact open.

Remedy:
Replace the heater relay.

Cause:
Heater relay solenoid defective.

Remedy:
Replace the heater relay.

Cause:
Connection from heater relay to electronic module open-circuited.

Remedy:

1. Check plug connections.

2. Check the connection wires for continuity.

Cause:
Heater pressure switch open- or short-circuited.

Remedy:
Replace the heater pressure switch.

Cause:
Connection from heater pressure switch to electronic open-circuited.

Remedy:

1. Check plug connections.

2. Check the connection wires for continuity.

Cause:
Foreign objects in heater pressure switch.

Remedy:
Replace the heater pressure switch.

Apr 14, 2015 | Miele Washing Machines

2 Answers

Hayward h series Bo problem


make sure you have adequate gas pressure

May 17, 2014 | Hayward H-series Electronic Gas Pool...

1 Answer

Why do the clothes come out of the washer hot even when I use cold water?


1 You may use a program with pre-drier ...
2 the program uses hot water for rinsing ...
3 the machine has a malfunction and the heater remain in function during the hole process ...
To check these try to use other programs ..and see if they came out the same ..in this case you know that there is something wrong with the heater ..and you have it checked and repaired ..cause the heater working all the time is a big power consumer ..

Mar 18, 2011 | LG WM0642H Front Load

1 Answer

Getting a F51 message


F51

Heater pressure switch

The program is interrupted and the drain pump is operated. The display

shows Technical fault F51. Call Service Department. The buzzer is

activated for 2 minutes.

Background information:

Start position:

One second after the program start, heater relay K1/1 is activated. This

enables a check as to whether the contacts on heater pressure switch B1/13

have closed on switching steps 21/22 or 11/12.

Cause:

Heater relay defective; contact open.

Remedy:

Replace the heater relay.

Cause:

Heater relay solenoid defective.

Remedy:

Replace the heater relay.

Cause:

Connection from heater relay to electronic module open-circuited.

Remedy:

1. Check plug connections.

2. Check the connection wires for continuity.

Cause:

Heater pressure switch open- or short-circuited.

Remedy:

Replace the heater pressure switch.

Cause:

Connection from heater pressure switch to electronic open-circuited.

Remedy:

1. Check plug connections.

2. Check the connection wires for continuity.

Cause:

Foreign objects in heater pressure switch.

Remedy:

Replace the heater pressure switch

if you have any further questions message me back and please remember to rank this opinion it allows me to help people in similar situations in the future Thanks again Rick

Jan 23, 2011 | Miele Dishwashers

1 Answer

Heater won't maintain program high temperature


Not sure which one is correct but here is a link to the Pentair/sta-rite site so you can get the information.
Sta-rite Heaters

Feb 22, 2009 | Sta Rite STA-RITE CONTROL BOARD KIT -...

1 Answer

Cannot get thermostat to work with previous owners programming.


turn the power off to the thermastat for 5 min (should be a switch on unit) and it should reset

Dec 11, 2008 | Honeywell CT87B ROUND HEATING&COOLING...

Not finding what you are looking for?
Comfort Zone CZ9009 Oil Filled Electric Utility Heater Logo

592 people viewed this question

Ask a Question

Usually answered in minutes!

Top Comfort Zone Heating & Cooling Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Paul Carew

Level 3 Expert

3530 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Are you a Comfort Zone Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...