Question about RCA HD61W66 61" Projection HDTV

1 Answer

It has tripple vision and looks like a bow tie.

Posted by rock_ward on


1 Answer

derik purlee

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 110 Answers

Hi, sounds like a convergence issue. try this...

  • Look through your manual. Your manual will always give you the most specific directions for your particular model. Look for an "adjusting convergence" or "set manual convergence" section.

  • Enter the menu on your TV. Use the remote control and bring up the menu.
  • Choose "Convergence." This may be under "Picture Settings," "Function" or "Advanced Options."
  • Select a color. You will have red, green and blue to choose from. Do each one, starting with red.
  • Press "Enter." A crosshair pattern will appear on your screen.
  • Adjust vertically. If there is a horizontal red line visible, press the up or down arrow keys (or channel up or down) to adjust the convergence until the line is superimposed on the horizontal-center line of the white crosshair.
  • Adjust horizontally. If there is a vertical red line visible, press left or right (or volume up or down) to adjust horizontally. Do this until the line is superimposed on the vertical line of the white crosshair.
  • Save settings. It is important to save your settings when you are done, instead of simply exiting the menu.
  • Repeat these steps for all colors.

  • good luck!

    Posted on Feb 02, 2011


    Add Your Answer


    Uploading: 0%


    Complete. Click "Add" to insert your video. Add



    Related Questions:

    1 Answer

    How to tie a big bow on a Christmas wreath

    I think you have this posted on either the wrong site or the wrong area, this area is for Projection television questions.

    I would just buy a wreath with the bow already on it.

    Dec 11, 2012 | Televison & Video

    3 Answers

    How do you tie a bow tie

    Hello thanks for using fixya
    To know how to tie a bow tie. See the following videos carefully, They are surely going to help you out,

    I hope this solution will helpful 4 u

    Please don't forget to click on Four thumbs which are given below & then write testimonial in your words for appreciation if it is helpful
    THANKS & Keep Using fixya

    Jan 30, 2011 | YouTube Videos

    1 Answer

    I just bout my martin bow it can be changed from 50 60 and 70 pounds i want it to be a 70 and safe to use. Also it says read manual before use mine didnt have one any where. It says on the string to please...

    Scroll to the bottom of the link for the manual. I'm sure if you look on YouTube you will find instructions on tieing a peep. Use dental floss. Don't shoot it without an arrow and you're off to a good start. ;-)

    Jun 03, 2010 | Martin Bengal Compound Bow

    1 Answer

    Where is the cabin air filter on a chrysler pacificer 2007 located

    under the dash on the drivers side youll see a long recangle with a clip that looks almost like a bow tie slide the bow tie towards the back of the car remove cover and you should see the filter hope this helps good luck

    Feb 25, 2010 | 2008 Chrysler Pacifica

    1 Answer

    3d picture and looks like bow tie

    Bad STK ICs replace both ICs will have part number on them STK392-110s if this is what you have upgrade to 150s! ICs are Big black ICs also ck 2.7 ohm resistors near ics.

    Sep 16, 2009 | Samsung HCM4215W 42" Rear Projection...

    1 Answer


    Hi, thank you for visit fix ya.
    Resolder all connections around fly back ( check for open pico fuse).
    if still problem, replace convergence board.
    Thank you

    Jul 27, 2009 | RCA HD52W58 52" TV

    1 Answer

    Bow tie looking picture with 3d color mis-alignment

    you have lost convergence. First thing to check is to see if you are missing the convergence option in the customer setup menu. if you do not have this option then i suggest reading the article in the tips and tricks section entiltled "the fl231 fuse problem" this is a common and sometime easy repair if you do have it then you might need a convergence power board

    Mar 09, 2009 | RCA R52WH73 Projection Television

    1 Answer

    Picture is blurry and is shaped like a bow tie on my tv

    This is a convergence problem that you can fix if you can solder. Let me know if you wish to attempt the repair and I'll post additional details and instructions.


    Oct 10, 2008 | Mitsubishi VS-55707 TV

    Not finding what you are looking for?
    RCA HD61W66 61" Projection HDTV Logo


    Ask a Question

    Usually answered in minutes!

    Top RCA Televison & Video Experts

    The Knight
    The Knight

    Level 3 Expert

    76573 Answers

    matt martin
    matt martin

    Level 3 Expert

    1258 Answers

    Cindy Wells

    Level 3 Expert

    6253 Answers

    Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides