Question about Behringer Dsp1124p Feedback Destroyer Pro with Parametric Eq

1 Answer

How o u hook up behringer feedback destroyer to a powered mixer

Posted by u_punk19 on

  • Anonymous Apr 01, 2014

    how to hook up to external eq

×

Ad

1 Answer

ABRsvcs

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,234 Answers

In order for this to work properly it must be inserted between the last pre-amp stage and the power amp. Can you please update this with the mixer that you are using? With the make and model of the mixer, I can provide you with a connection description. Since each mixer will have different labeling and options, it is not possible for me to accurately describe the connections without hte make and model.

Thanks,
Dan

Posted on Feb 02, 2011

  • markso2 Sep 17, 2011

    Not sure about that person's powered mixer, but I have the Behringer Feedback Destroyer and a Yamaha 312SC powered mixer, and so far I haven't had luck. It says I need to bring the return back to channels 5/6 or above, but I'm not sure what type of cable to use, and whether I then control the volume on the return channel or the source channel. Thanks!

×

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I want to purchase a behringer 15 band graphic equaliser and connect it to a numark 5000fx mixer via skytec pro600 power amp can you help.


The signal path to follow is explained below:

*Audio Source(Cd/LapTop/Ipod)output to,
*Numark 5000FX Input, Then master/main outputs go to,
*Behringer FBQ1502 Inputs, then outputs go to,
*Pro600 Power Amplifier Inputs, then power amp outputs hooked up with a speaker each side.

Hope this helps.

Nov 06, 2013 | Behringer FBQ1502 Ultragraph Pro Dual...

1 Answer

How do i hook up a feedback destroyer to my EQ,COMPRESSOR,COSSOVER


Put at end of the chain. In this order: (1) EQ (2) Compressor (3) Crossover, (4) Feedback Destroyer.

Dec 12, 2012 | Behringer Dsp1124p Feedback Destroyer Pro...

1 Answer

What is the best way to connect an external EQ or Feedback Destroyer unit to a Behringer PMP3000


Get an "insert snake" which splits each of two TRS plugs into TWO TS plugs.
Plug the TRS ends into the MAIN INSERT jacks and each of the "TIP" plugs at the other end into inpout jacks of the destroyer. Plug the "RING" plugs into the output jacks of the destroyer. You will need a snake with at least two sets of splits. I use a Behringer PROCOM compressor. For those the TRS plugs go into the channel insert jacks and the tips and ring plugs go to the in and out of each channel of the compressor respectively.

Jan 11, 2012 | Behringer Pmp3000 16 Channel Audio Mixer

1 Answer

How to hook up speakers? Sound sounds muffled


You DON'T connect speakers to this... this is NOT a powered mixer... you MUST use external amplifier !!!! You use bvalanced (TRS) cables to a suitable power amplifier which connects to speakers. Some Behringer mixers such as the PMP5000 have built in amplifiers to drive speakers... yours does not.

Jul 23, 2011 | Behringer Xenyx 1002fx Mixer 10 Input 2...

1 Answer

How to connect feedback destroyer pro dsp1124p ?


It all depends what you are connecting it to... Essentially wire it someplace between the preamps of microphones and the power amps that drive speakers. The only stipulation is that you want the levels to be "line level" signals.

If you are using a powered mixer, you will do this as an "insert" using the insert effect jacks. The preamp signal goes to the "in" of the destroyer, and the "out" goes to the following amp.

Dec 13, 2010 | Behringer Dsp1124p Feedback Destroyer Pro...

1 Answer

Show me how to hook up the Behringer destroyer pro?


What are you going to hook up to?

Essentially you connect the power cord to power and connect outputs from say a mixer to the inputs using TRS balanced cables... and connect the outputs of the unit to your power amplifier.

Note taht there are MANY other possibilities using "inserts:on some devices.

Dec 02, 2010 | Behringer Dsp1124p Feedback Destroyer Pro...

1 Answer

How do i hook up a powered moniter to the behringer xenyx 2442fx mixer?


hook it up to one of the aux output sends (1 or 2), and use the corresponding aux send knob per channel to put each channel necesarry into the monitor signal.

Nov 20, 2010 | Behringer XENYX 2442FX Mixer

1 Answer

I have Behringer pmp 2000 mixer but it burned my fuse. How can I buy it?


If the fuse blew do NOT replace it till the unit is serviced or you will burn up more components. These units will blow out from a minimum of three to 30 components when they blow.

There is weak insulation between layers of the power amp circuit board and the arcing destroys a minimum of three transistors and often many more components on the power supply board as well.

I have repaired several of these and it is a lot of work. The power amp module can be had for about $175 but it often takes out the power supply as well.

Jun 30, 2010 | Behringer Pmp3000 16 Channel Audio Mixer

1 Answer

Fuse and fuse holder needed for Behringer 3000 pmp mixer


Try this Behringer support:

BEHRINGER USA, Inc.
18912 North Creek Parkway, Suite 200
Bothell, WA 98011
Tel.: +1 425 672 0816
Fax: +1 425 673 7647

I just repaired a PMP3000.

A bit of warning on these. Do not let a speaker leads get pulled while powered. They can arc out the power amp causing extensive damage.

If the fuse ever blows do NOT replace the fuse as much more damage will result. Service the unit before using.

May 12, 2010 | Behringer Pmp3000 16 Channel Audio Mixer

2 Answers

Finding a way to hook this up


Send main 1 out to your Crown. Jump Mon send to PWR am insert.

Mar 11, 2009 | Behringer Pmp3000 16 Channel Audio Mixer

Not finding what you are looking for?
Behringer Dsp1124p Feedback Destroyer Pro with Parametric Eq Logo

Related Topics:

535 people viewed this question

Ask a Question

Usually answered in minutes!

Top Behringer Music Experts

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Lee Hodgson
Lee Hodgson

Level 3 Expert

4810 Answers

The Knight
The Knight

Level 3 Expert

76416 Answers

Are you a Behringer Music Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...