Sorry bubbabear 64, you are wrong you need to reset the copier with sim 14, once you have cleared the jam, there is no sensor in the fuser so often if the paper gets crumpled in there is doesnt trigger and sensors so the customer trys to copy again and again, seen it many times.
John Sharp Tech
Trouble content 5 continuous detection of POD1 not-reached jam
Section PCU
Case 1 Cause The fusing jam is not removed completely. (Jam paper
remains.)
Check
and
remedy
Check the fusing section for jam paper. (winding, etc.)
Case 2 Cause POD1 sensor trouble or harness connection trouble
Check
and
remedy
Check the POD1 sensor harness. Use SIM14 to
cancel the trouble.
Case 3 Cause Fusing unit installation trouble
Check
and
remedy
Check the fusing unit installation.
h5-01 means 5 consecutive jams in the fuser area. Sometimes this is caused by a defective sensor but most often by a worn or damaged fuser or not clearing jams correctly the first time.
Fix jamming problem and clear by entering SIM (P * C * ) 14 ->1
H5-01 indicates tha the paper sensor is defective in the fusing unit. The only way you can try to reset that one is buy turning the power off, wait 30 seconds and turn the power back on.
If the error code returns the fusing unit will have to be fixed to take care of the paper sensor.
818 views
Usually answered in minutes!
×