Question about Konica Minolta DiMAGE A2 Digital Camera

1 Answer

The manual focus ring on my camera doesn't work. The ring turns but does not seem to adjust the focus. Automated focusing still works. How to fix it?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,006 Answers

Two methods:-

1. Use the slider switch on the left of the camera to set it to MF (manual focus). The focus ring is an electronic one rather than a physical control like the zoom ring, so the response can seem slow.

2 Go into the camera menu and enable DMF (Direct Manual Focus). This allows you to override the autofocus simply by adjusting the focus control, but it does not work if the slider switch is set to the AF C setting (continuous autofocus), it only work in the AF-S (AF only activates once when the shutter is half pressed).

Posted on Mar 25, 2011

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Eos 70d 18-135 stm lens focus ring does not turn when focusing?


It may be that the focus ring is only engaged when the lens is switched to manual focus.

Jun 26, 2014 | Cameras

1 Answer

The rocker zoom in and out on the top has frozen and doesn't work suddenly :(


Hi,

I think focusing ring got stuck or jammed. What you can try to do is spray some compressed AIR into the lens to try to free up any sand or dust that may have worked its way in. If that doesn't help, you can gently bump the camera to try to free the focusing ring.


or.......

You can try to turn camera ON at the table (facing it to the ceiling), don't put camera down face to the floor when opening.


Else your camera need to be disassembled to get at the focusing ring at Service Center.



Good luck and have a nice day.


Rating the solution is highly appreciated.

Jul 03, 2011 | Cameras

1 Answer

Hello, I have a celestron c9,25. I adjust a nikon D3100 with T-Ring and Adapter to my telescope. Firstly I focus to moon, using an eyepiece, then I removed the eyepiece and adjusted the Nikon. The...


Because the camera has a different focus point from the eyepiece. TURN the focus knob until the camera comes into focus. OR you can buy a "focus ring" for the eyepiece which attaches to the barrel of the eyepiece and is adjustable-- then focus with the camera FIRST and then insert the eyepiece with the ring on it and lift it UP until the image comes to focus-- then tighten the ring. NOW you can use that eyepiece to roughly focus the camera.

Jun 25, 2011 | Celestron C9.25-CF 2350mm f/10 Aluminum...

1 Answer

How to focus my document camera


  1. Power-Cycle your AVerVision Document Camera to reset the focus motor.
  2. If your Camera has Auto focus, Press the auto focus button on your document camera's control panel.
  3. Reset your camera to Default by Pressing MENU > Default > Yes > Enter. Then Power-Cycle your camera.
  4. Check your output device's focus adjustment.
  5. Power-Cycle your AVerVision Document Camera to reset the focus motor.
  6. If Manual Focus adjustment is available on your camera's remote control, try adjusting back to focal point from the remote.
  7. If your camera has a Manual focus knob, manually adjust the focus by turning the focus knob located on the camera head.
  8. If adjusting the focus knob does not focus the image, please click here http://support.averusa.com/kb_article.php?ref=9869-UMJQ-1105 for instructions on how to fix the focus ring.

Feb 02, 2011 | Avermedia AVERVISION 300AF+ PORTABLE...

1 Answer

My lens will not focus or shoot a picture. It will on manual but will not focus but at least I can take a shot in manual. when its on auto the lens will do nothing. It won't focus or take a picture. Its...


I have the same problem. I can make it temporarily work by manually turning the focus ring until it is out fully. Then it will auto focus and take photos until I turn the camera off or it times out. Then I have to repeat the process. It's annoying, but at least it works for me. Try it and post to let me know if it works for you

Jan 03, 2010 | Canon EF-S 18-55mm f/3.5-5.6 USN Lens

1 Answer

I cant seem to get the manual focus to work on my vx2000


Are you sliding the switch from "Auto" to "Man" first? The focus switch is located at about the mid-point of the camera, just forward of the flip out LCD. The focus ring is the larger of the two lens rings, the one farthest towards the front of the camera. The smaller ring behind that one is the zoom ring. Also, make sure something isn't inadvertently pressing down the "Push Auto" button immediately below the focus switch - that can force the camera to autofocus even if in "Man" (manual) focus mode. Hope that helps!

Oct 21, 2009 | Sony DCR-VX2000 Mini DV Digital Camcorder

1 Answer

See-through lens is blurry and does not reflect the change in focus when I adjust the wide angle lens on my digital rebel xti. What's the problem and how can I fix it?


Check the AF/MF switch over the lens left side. Should be on AF to let the camera focus by itself. If not, you have to manually focus using the focusing ring.

If the camera is in AF and still no focusing, considere to carry your camera for service.

Aug 01, 2009 | Canon EOS 400D / Rebel XTi Digital Camera

1 Answer

Quantaray 28-90 for Nikon N65 zoom ring locked up


There is no secret locking switch. If a little gentle jiggling doesn't free the zoom ring, then I can only suggest you take it in to a reputable camera shop for a Clean-Lubricate-Adjust (CLA).

Sep 03, 2007 | Quantaray 28-90mm f/3.5-5.6 for Pentax

1 Answer

Focus modes


There are four focus modes: S-AF (Single auto focus), C-AF (Continuous auto focus), MF (Manual Focus), and S-AF/MF (Simultaneous mode). (SINGLE Auto Focus): Focusing is performed once when the shutter button is pressed halfway. C-AF (CONTINUOUS Auto Focus): The camera repeats focusing while the shutter button is pressed halfway. (MANUAL FOCUS): The function allows you to manually focus on any subject while looking through the viewfinder. SIMULTANEOUS USE of S-AF mode and MF mode: You can fine-adjust focus manually by turning the focus ring after AF is performed in the S-AF mode.

Sep 04, 2005 | Olympus EVOLT E-300 Digital Camera

Not finding what you are looking for?
Konica Minolta DiMAGE A2 Digital Camera Logo

254 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Cameras Experts

Ekse

Level 3 Expert

13434 Answers

 Larry
Larry

Level 2 Expert

126 Answers

Pierre Laplante

Level 3 Expert

2042 Answers

Are you a Konica Minolta Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...