I need display of 56v samtron monitor - SAMTRON 55V 15" CRT Monitor

Hey there.
See my tip here: http://www.fixya.com/support/r9424404-fix_osd_lockout_or_screen_display

Enjoy my tip.
Slasher_X

connect another cable as follows
1-red
2-green
3-blue
4-gnd
5-gnd
6-red gnd
7-green gnd
8-blue gnd
9-+5v from display card
10-stand by
11-synchronus ground
12-sda
13-hsync
14-vsync
15-scl
the numbers of pin are given
under pin

your power supply is probably bad. open the case with it unpugged and look for leaking or crowned capacitors. most electronic repair shops can replace them for you

my samtron 56v problem stand by when i power off yet i power on it is off position whats problem with me.switch is many time pressing then is on position.what is parts of my monitr suplly fault.wich part is spoil

HI all,

The problem im facing is, im using a Samsung samtrong 56V monitor, there is horizontal line appearing in the both ends of the monitor screen which gives a mirroring effect. ( for ex: if ya move the cursor on that it will show multiples of cursors displayed in that line only.)

Please suggest me a method to solve this issue. are there any patch avail for this if so please send a link to download.

thanks a lot

possible faulty VGA Controller board.

samtron 56v monitor wosulation problem how can i sovle this problem

its seems you have a cold solder.

You can see one ic in right of crt base,plz resolder it (90%sure)

change the 5v regulator 7805 which is the supply for microprocesor