I cant install PC charging driver for my MOTOROLA V3im, there is no FOUND NEW HARDWARE WIZARD, I dont think my usb connector is damaged i tried/test it and its working to other gadgets. Is there any other way to install USB and PC CHARGING DRIVER of my MOTOROLA v3im, Also my bluetooth is not working do i have to configure it?

Question 1

1helpful

1answer

I cant install PC charging driver for my MOTOROLA V3im, there is no FOUND NEW HARDWARE WIZARD, I dont think my usb connector is damaged i tried/test it and its working to other gadgets. Is there any other...

Thanks for visiting FixYa!

If you need to download the USB charging driver you can go to this website:
http://motoroladownloads.webs.com

Sign up and verify your email address. Then, go back and download what you need to - for free. Also, there's some good information there for troubleshooting.

Make sure you download the correct driver. And, you can download the Motorola Phone Tools (PC Suite) there also - for free.

Here's a link to view your Owner's manual if you do not have one.
http://www.motorola.com/staticfiles/Support/US-EN/Mobile%20Phones/MOTORAZR%20V3i/US-EN/_Documents/Static%20Files/V3i_UG.pdf

Look, beginning on page 25 (bottom right) of the online manual on how to set up your Bluetooth. If you're pairing a headset, the code is usually 0000 (four zeros).

If you have Internet (Data) service I've discovered a new Mobile Directory online.

It's at http://j.mp/mobilelink

You can go there now, but some of the links won't be finished for Motorola phones until next week. You still may want to set it as your phone's home page. (If you use your phone on the Internet.)

Feel free to click on the Reply link (here) if you need further assistance.

John

Feb 08, 2011 • Motorola Mobility RAZR V3i Cellular Phone

1helpful

1answer

How to start internet in PC using MOTOROLA L6.I have dongal.

download the Motorola L6 modem driver here.
After you download the driver, make sure extract it somewhere in your computer since I packed it in a ZIP file. Connect your Motorola L6 phone by using a USB cable until the system tray shows you the pop-up message “Found Motorola L6 Modem”. You’ll meet the “Add New Hardware Wizard” dialog box then. Follow the instructions until you told to specify an exact location for the corresponding hardware, which is your Motorola L6 phone.
When your files are located, a dialog box will warn you whether to stop or continue the installation since the driver hasn’t digitally signed by Windows. Click “Continue Anyway”, Windows will start to copy the driver files into a specific location. As the process finished, your Motorola L6 phone will automatically turn its mode to Loud and start charging the battery.
That’s all. Next thing you should do is set up your internet connection through Start > Settings > Control Panel > Network Connections. Get yourself to the Files menu and choose New connection.. You’ll be guided with a step by step New Connection Wizard.

Mar 25, 2010 • Motorola Mobility L6 Cellular Phone

1helpful

1answer

When I plug into usb it doesnt recognize it

while your phone is plugged in go to start, control panel, add new hardware and go through the setup wizard.

Mar 03, 2010 • E-Machines W1800 PC Desktop

1helpful

2answers

I CANT BROWSE MY MOTOROLA L6 TO MY COMPUTER, WHAT DRIVER SHOULD I INSTALL?

You can download the Motorola L6 modem driver here.

After you download the driver, make sure extract it somewhere inyour computer since I packed it in a ZIP file. Connect your Motorola L6phone by using a USB cable until the system tray shows you the pop-upmessage “Found Motorola L6 Modem”. You’ll meet the “Add New HardwareWizard” dialog box then. Follow the instructions until you told tospecify an exact location for the corresponding hardware, which is yourMotorola L6 phone.
When your files are located, a dialog box will warn you whether tostop or continue the installation since the driver hasn’t digitallysigned by Windows. Click “Continue Anyway”, Windows will start to copythe driver files into a specific location. As the process finished,your Motorola L6 phone will automatically turn its mode to Loud andstart charging the battery.
That’s all. Next thing you should do is set up your internet connection through Start > Settings > Control Panel > Network Connections. Get yourself to the Files menu and choose New connection.. You’ll be guided with a step by step New Connection Wizard.

Jul 21, 2009 • Motorola Mobility L6 Cellular Phone

0helpful

1answer

If I plug it into the laptop it makes the sound when a USB device is plugged in. It says found new hardware, then it wants to install the hardware with the Wizard all goes well until the wizard tells

It seems the Operating System does not have drivers for your new device or some portion of the drivers are corrupted. If you have the drivers cd for the USB stuff, install the drivers without attaching it to the pc ok. Attach the device when prompted or when completed. Make sure that any previous installations of the software and/or the device should be uninstalled. Good luck

May 04, 2009 • Computers & Internet

0helpful

1answer

I cant use my USB conector in PC

you just need to find a free driver to download for the computer to be able to read the device. After the driver is downloaded and installed, it should read automatically. At least that's how it works with windows vista. IF you have XP, you might need to run the wizard after the driver is installed

Feb 04, 2009 • Sony Ericsson HBV-100 Bluetooth VoIP Kit...

3helpful

2answers

W230 cant connect to a pc

http://www.cellphone9.com/motorola-w230-file-transfer-problems-firmware-update/
follow the above line.... and probably you must have a memory card in the fone.... once you are done with downloading the driver connect the fone and you would get the 'found new hardware baloon' select 'no not this time' and click next and browse to the driver which is downloaded, click next and finish the process...
once you remove and connect the fone you would get a prompt on the fone's display "connect phone as storage device" click yes to transfer data or click no or leave it alone for the fone to get charged...
hope this helps you..
use this alt link to download driver
http://direct.motorola.com/hellomoto/in/support/usb_drivers_pc_charging_drivers.asp
incase of any further clarifications vishal at games.com....
Cheers, vishal...

Nov 12, 2008 • Motorola Mobility W230 Phone US with...

0helpful

1answer

How to connect webcam to skype

hi somecraic, some webcam are plug and play and comes with driver, just plug the usb connector to your pc usb port and your pc start to install new found hardware, and when the installation wizard window come out, and when it ask for the driver, insert driver, just follow the instruction. And when its done, open your skype, click the video and its done.

Otherwise, best thing to do is check your manufacturers website for FAQs.

Sep 17, 2008 • Computers & Internet

0helpful

1answer

Installed Advent Bluetooth v2.0 EDR Class2 via USB and it works, however when i start PC up it states New Hardware found called Standard 33600bps Modem which i dont think i got. If i cancel the wizard it...

Thats because your Bluetooth includes other drivers too. But is normal just accept the Wizard and Install it too.

Thank You!!!!!!!!

Jun 23, 2008 • Computers & Internet

0helpful

4answers

To know my the free download software of my phone

For those who are having connection problem with moto

Step 1. Get the software

Go to Motodev and download Motorola USB Driver (you will need to register)

Also download your chosen p2k program e.g. p2kMan

It would also be a good idea to locate RSD Lite – you will have to use Google to find this as it is classed as warez and we cannot give
links.

Step 2. Install the driver program

Extract the file “Motorola_EU_Driver_Installation.msi” from the zip file you downloaded.

Double click on this file and the installation will start.

Click next and the EULA will appear

Click on "I Agree" (obviously having read the agreement first Angel), then next.

The program will now install

Click close to end the install procedure

During the installation process you may see the following screen 1 or
more times

Should this appear hit "Continue Anyway"

Step 3: Install the drivers

You will now have a new program group in your start>programs menu -"Motorola Driver Installer", with a shortcut called "Motorola Driver Installer.exe" within it.

Make sure the phone is disconnected at this time.

Run this program, and it will check whether the drivers are already
installed, when this is complete you will see the following screen

Under "Operation Mode" (lower left), select "Clean and Reinstall" (the bottom option).

Then hit "Start"

The program will then do its thing. When it is finished hit "Exit"

You may get the message about Windows Logo testing again - if you do hit "Continue Anyway"

Step 4: Connect the phone

Make sure the phone is turned on then connect the USB cable. It is best
to use a USB port on the rear of the PC rather than front mounted ports
as these sometimes connect to the motherboard via a hub

When you plug the phone in Windows will find new hardware - Motorola
Phone (V3), then Motorola USB Modem. The installation should
complete without intervention.

You should now be able to connect using Mobile Phone Tools, the phone
should also be charging.

We now want to install the P2k Drivers. First make sure MPT is not
running.

Now with the phone still connected run one of the P2k programs, I generally use P2kMan - but thats just me. Its best not to use p2k Tools as this may start in AT mode and confuse matters.

When you do this Windows should find several new devices and after a
short while the new hardware wizard will run. In the rare event the new
hardware wizard does not start, install and run RSD Lite.

The first screen to appear asks if you wish to connect to Windows Update

Select "No, not this time", then click on "Next"

Choose "Install the software automatically (Recommended)", then hit "Next"

The driver for Accessories Interface is then installed, after a short
while the following screen is displayed

Click "Finish"

The new hardware wizard will then run again

Once again select "No, not this time", then click on "Next"

This time the wizard asks for drivers for "Data Logging MCU Interface".

Choose "Install the software automatically (Recommended)", then hit
"Next"

Again the drivers are installed then after a short while the
following screen is displayed.

Click "Finish"

The new hardware wizard will then run for a third time

At the first screen select "No, not this time", then click on "Next" in the same way as before

This time the wizard asks for drivers for "Test Command Interface".

Choose "Install the software automatically (Recommended)", then hit "Next"

Again the drivers are installed then after a short while the following screen
is displayed.

Click "Finish"

Your P2k drivers are now installed and the P2k programs should
recognise the phone

Remember if you connect using a different USB port in the future,
Windows will recognise new hardware and you will need to repeat these
steps

Step 5: Flash Interface Device

If at anytime you choose to flash your phone you will need the Flash
Interface device installed. This device is used to communicate with the
phone while it is in bootloader mode.

In order to run the hardware installation wizard for this device you
can do one of two things. Either use RSD Lite to flash the phone as
normal (browse to the file and hit start) and RSD Lite will switch the
phone to bootloader mode for you. Alternatively you can start in
bootloader manually (hold * and # while turning the phone on), then
connect the USB cable.

Either way the new hardware wizard will run again.

As before select "No, not this time", then click on "Next"

Choose "Install the software automatically (Recommended)", then hit
"Next"

Again the drivers are installed then after a short while the following screen
is displayed.

Click "Finish" and you are done - you can now flash your phone with RSD
Lite.

Once more remember if you connect using a different USB port in the
future, Windows will recognise new hardware and you will need to repeat these steps

Last edited by mikekay10 on Sat Jan 13, 2007 6:08 pm, edited 2 times in total

Nov 28, 2007 • Motorola Mobility RAZR V3

Question 2

J. Van

Master 1,738 Answers
Posted on Jan 31, 2011

J. Van

Master

Joined: May 30, 2008

Answers

1738

Questions

4

Helped

624321

Points

5775

Go to: http://www.motoroladownloads.webs.com
Register your email address, (Then, read the information to download the appropriate USB Drivers and install them.)
Other downloads for your phone are also available there as you'll need them, too.

You can also Download Motorola Phone Tools (PC Suite) for your computer. This will get you up and running.

Note: Make sure to update the Motorola Phone Tools program a couple of times until you have v5.0.5 (or better if available).

Answer 2 · 2/8/2011 12:00:00 AM

J. Van

1738 Answers
Posted on Feb 08, 2011

SOURCE: I cant install PC charging

Thanks for visiting FixYa!

If you need to download the USB charging driver you can go to this website:
http://motoroladownloads.webs.com

Sign up and verify your email address. Then, go back and download what you need to - for free. Also, there's some good information there for troubleshooting.

Make sure you download the correct driver. And, you can download the Motorola Phone Tools (PC Suite) there also - for free.

Here's a link to view your Owner's manual if you do not have one.
http://www.motorola.com/staticfiles/Support/US-EN/Mobile%20Phones/MOTORAZR%20V3i/US-EN/_Documents/Static%20Files/V3i_UG.pdf

Look, beginning on page 25 (bottom right) of the online manual on how to set up your Bluetooth. If you're pairing a headset, the code is usually 0000 (four zeros).

If you have Internet (Data) service I've discovered a new Mobile Directory online.

It's at http://j.mp/mobilelink

You can go there now, but some of the links won't be finished for Motorola phones until next week. You still may want to set it as your phone's home page. (If you use your phone on the Internet.)

Feel free to click on the Reply link (here) if you need further assistance.

John

Answer 3 · 2/8/2011 12:00:00 AM

J. Van

1738 Answers
Posted on Feb 08, 2011

SOURCE: I cant install PC charging

Thanks for visiting FixYa!

If you need to download the USB charging driver you can go to this website:
http://motoroladownloads.webs.com

Sign up and verify your email address. Then, go back and download what you need to - for free. Also, there's some good information there for troubleshooting.

Make sure you download the correct driver. And, you can download the Motorola Phone Tools (PC Suite) there also - for free.

Here's a link to view your Owner's manual if you do not have one.
http://www.motorola.com/staticfiles/Support/US-EN/Mobile%20Phones/MOTORAZR%20V3i/US-EN/_Documents/Static%20Files/V3i_UG.pdf

Look, beginning on page 25 (bottom right) of the online manual on how to set up your Bluetooth. If you're pairing a headset, the code is usually 0000 (four zeros).

If you have Internet (Data) service I've discovered a new Mobile Directory online.

It's at http://j.mp/mobilelink

You can go there now, but some of the links won't be finished for Motorola phones until next week. You still may want to set it as your phone's home page. (If you use your phone on the Internet.)

Feel free to click on the Reply link (here) if you need further assistance.

John

Related Topics:

Trustworthy Expert Solutions

1 Answer

J. Van

1 Related Answer

J. Van

Add Your Answer

Attachments: Added items

Related Questions: